20 Most Recent Black & Decker 11A 1 Router - Page 7 Questions & Answers

The piercing anvil has become blunt, worn or broken. You can buy these for either the left or right side but if one has gone, the other may not be far behind, so I'd buy both sides. They're an easy enough fit and should be easily obtained from your local Stanley Bostitch dealer, or Bostitch themselves.

Hi,

There is a 340 sander but no 345...here is a listing off B&D sanders and there are exploded views for them...

http://www.ereplacementparts.com/black-and-decker-sander-parts-c-4167_4300.html

heatman101

not that I see by looking at the breakdown for this tool. They don't offer an owners manual for the different types online. If the belt is that loose you might want to take a look at the drive pulleys. Let me know if you need more assistance.

a great place to find manuals online is www.manualsonline.com

Since the jam light blinks, have you considered that it might be jammed?
Try removing all the nails, checking the action, and they reinserting?
Other than suggesting taking it in under warranty or taking it apart to check switches and sensors, I can't think of what I could suggest.

You can use Arrow staples JT-21

The replacement blades for a Black and Decker KW715 portable planer are Black and Decker part number X24192. It looks like there are a number available on Ebay.co.uk at the moment.

There are also third party replacements for these blades. Trend PB/29 blades should work as well.

If this answer was useful, please vote for it. Thanks!

You can always try eReplacementParts.com for full parts lists and diagrams for those black and decker tools.

Older model - managed to heat some water in the microwave and stretched the belt over the drive wheels when a bit more pliable due to thermoplastic nature of drive belt - used thin teaspoon handle as tyre lever and seems to be fitted securely now.

Look at the back of the staple gun just under the electric cord and you will see a 1/2 loop of spring steel sticking up from the chrome base. Push it down lightly and toward the front of the stapler - when it is all the way forward lift the loop it while in the forward position and while up - draw it back and the will come out of the staple gun.

See my other thread on this subject.
http://www.fixya.com/support/t3966742-sandpaper_will_not_stick_rubber