20 Most Recent Behringer DJx700 5-Channel Pro DJ Mixer with Digital Effects & Bpm Counter - Page 6 Questions & Answers

That unit has operational amps on chips for each channel and if one fails then it lets that channel die. It requires signal tracing to find the point of failure. It may be a capacitor also.

Review says that the high range tweeter is not up to the job. Click Support and request a new Tweeter and Crossover unit. https://www.behringer.com/product.html?modelCode=P0379 ..

Maybe from Behringer

The amplifier may have destroyed itself. Take it to a Behringer Authorised Repair Shop for repair.

That appears to be Italian in our English speaking website PMP 4000. Start the source a little and then the supply voltage of the amplifiers disappears https://translate.google.ca/?hl=en&tab=TT&sl=auto&tl=en&text=PMP%204000.%20Porneste%20sursa%20putin%20iar%20apoi%20dispare%20tensiunea%20de%20alimentare%20a%20amplificatoarelor&op=translate Only Behringer can fix

Service - Behringer

www.behringer.com > service

SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. and https://www.behringer.com/product.html?modelCode=P0A8N ..

I am guessing that the parts inside of your mixer are starting to wear out and your mixer is starting to die on you and you should buy a new one and the motor could be going bad too.

There is a problem with the internal circuitry. There may be one of more components that have failed or weakened.

$95 an hour! seriously i don't know why more people haven't tried this, i work two shifts, 2 hours in the day and 2 in the evening...and whats awesome is im working from home so i get more time with my kids. heres where i went Copy Here........EARN75.com

Radio Shack may have the fans or can order it for you take the fan to a local Radio Shack store.

In order to help you we would need the make and model of the mixer.

Behringer recommends using a shielded CAT 5e cable with Ethercon connectors wired to the T568B standard to connect the two. Also you need to make sure that the board is completely powered on before turning on the S32 for proper connection. Make sure you are connecting between the Aes50A ports. When connected you should be able to see a green light next to Aes50A in the main screen. Then you will need to properly route the channels.

in what way? no power? dead?

https://www.manualslib.com/manual/1045668/Behringer-Ultratone-Kxd15.html

See if another audio source connected to the mixer produces the same results. Try with the same cable and then with another cable. The purpose of this procedure is to determine if it is the cable and/or the laptop. (Sound card problem???) or mixer. Is it ALL audio or just specific audio from for instance, a music application? Does it cut out using iTunes? The mixer may have a bad or oxidized input. Try a different input channel? Are you using headphones to listen? It may be the headphone amp? OR, if audio is produced via amped speakers, it may be the mixer output. Does the mixer have metering? Do the meters also cut out? Does the laptop do the same thing if plugging in headphones to the laptop directly (no mixer)?

You have given in detail which is helpful

I looked up what that unit is so I'm not uber familiar and this is before coffee, however, check your effects levels, possibly delays or echos are building up on an individual channel and adding to your total output making it clip. Even if you don't have the effects on output, they can work in the background and clip internally. Is the output sound affected? Magnetic interference is another possibility if you are running it close to pickups, recorders and other high power supplies. Trim levels set too high? I don't know your actual stage setup but these are a couple things I have experienced through the years. Ahh, here's coffee and a drink to you finding your problem.

https://www.fullguru.com/catalogsearch/result/index/?gclid=EAIaIQobChMIgMv_05ST4wIVh4uzCh2nIwqxEAMYASAAEgIGlvD_BwE&p=2&q=behringer+power+supply

needs service, if the inputs to amp are clean (test that yet)>)

Connect the two Behringer B215XL to the Right/Main Speaker Outputs. Monitor(s) would connect to the Left/Mon Speaker Outputs manual is here: https://assets.peavey.com/literature/manuals/xr684fand696f_manual.pdf

http://ewp.koncon.nl/images/ewp/manuals/mixers/eurorack_mixers843.pdf Free manual online at the link above: