hi restriction codes is nothing but your mobile is locked to particular network.due to this it accepts only the particular Sim when ever other network Sim is inserted it shows Sim restricted .there are many ways to solve this problem we can use software,cable ,codes etc....among them codes are the best .to get the codes you can visit here mobileunlocksolutions Here they ask the following details before rendering the unlock codes they are 1. Mobile model 2. Country from where you brought the mobile 3. Provider to which the mobile is locked 4. Imei number of the mobile Finally they will send you the unlock codes .once you entered the code in your mobile as for the instruction given by them .your mobile get unlocked and it accepts any network sim.
What specifically are the issues you're having with the speaker on this phone?
Are you having issues with the earphone itself, or do the issues happen when you place it on speakerphone?
A step to try is if you have a set of headphones/earphones with a 3.55mm jack you can plug it into your phone and see if the audio is still jumbled. If it is then it is most likely a defective device and you'll want to look into a replacement.
Another way to test it is to hook up a Bluetooth headset if the phone supports this type of connection.
If you would like further support feel free to respond with a better description of the problem and I'll be happy to help!
Hi if your Nokia 6500 classic mobile is asking for network unlock code ..Then visit sites like Unlock-Zone.com they are providing unlock code for all mobile models at reliable cost.You first check that whether the code is available for your country and network provider .If yes then pay for it and unlock your phone ...
Switch-off your phone. 1. Press and hold 3
keys; Green dial key, * Star key, no. 3 key on keypad and then press the
power on/off to swtich on the phone. Remember, do not let go the 3
press and hold keys until you see a formatting word screen show! 2.
After a few minutes when the Full phone formatting completed, your phone
will back to original system and factory settting.
the factory phone code will be 12345
Text STOP EF to 2474.Contact Customer care to get your LOAD back from 2474.Watch this video >> www.youtube.com/watch?v=m481byRK2fkto find out how to deal with this Scheme/scam and get your Load back.Please share to all your friends!
RESETTING PHONE NOKIA:Soft Reset will clear pending errors and bring your mobile to an initial state by restoring Factory setting. To operate this function on your mobile, the shortcut is: *#7380# This function apparently works on almost all nokia mobile phonesHARD RESET:It may happen that despite you have restored your mobile to factory setting, the error still exist. In this case, it is recommended that you opt for Hard reset •Enter the code: *#7370# and press Yes to confirm initialization. •Important Notice: It is recommended that you save all important information on your phone (e.g: memo, contacts etc) •To make a Hard Reset on a Nokia phone that is not willing to turn on, just press simultaneously these 3 buttons: •on/off + * + 3 •Before making a Hard reset better backup all your important information: contacts , memo...etcFORMAT NOKIA:While my phone if power ON. Press the *7780# code, this code is usually used for the N60 series phone but this code is not working for nokia 5310. And I tried also another procedure again by doing this process:Your phone must be power off, press the "*" + "3? + "green call key" but nothings happen again I haven't format my phone.What should I do for this phone, this is able to recognize in the computer and cannot format to hard boot formatting.My last choice is to find a flash utility cable suits in my phone and the software to re-program it and putting some IMEI codes.
You can get the unlock code for a Nokia 6500 Classic from www.mobile-unlocker.com at affordable cost. Unlocking process is very simple and easier here. Here are the steps for unlocking a Nokia 6500 Classic,1 - Switch on your Nokia 6500 CLASSIC without any sim card.
2 - Don't bother as to what is displayed on your Nokia 6500 CLASSIC.
3 - Compose #pw+CODE+1#.
4 - The Nokia 6500 CLASSIC would then display the message "SIM Restriction Off" and will be unlocked!
ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will Solved
First All Check:1.Confirm whether same sim card is working in other h.s or not.2.Make sure the sim slot is o.k. only try these two.3.If all the above steps fails, check the SIM card connector pins for damage.if so try to get serviced. 4.if ur sim card is good then it is problum form sim card ic u have u raplace it with SMD.u can make it jumper mean u can fix this prob with out sim card is for this contact.5.take sim connector slight up by pin then cheak by inserting sim.6.hot air gun on sim i.c. then cheak it.Last Option:IF make sure that the sim card hasn't been damamged at all sO Please You Go to Service& Sim Office and Get the Duplicate Sim Same Your No From Office OpratorProblem will Solved Quickly
hi to purchase sim unlock code visit mobileunlocksolutions.com here they ask you the network provider name to which your mobile is locked and the imei number of your mobile .finally they deliver you codes to unlock your mobile.
Restriction code for a mobile depends upon the network to which it is locked to. So you must specify the network too. Anyway you can have a try at www.mobile-unlocker.com this site provides accurate unlock codes at affordable cost. You can get the unlock code for your Nokia 6500C too from here.
high, all you need to do is the following, make sure the phone is on its first screen, ie so it looks like it does when your about to make a call,now press menu so it brings up the menu screen, so just press menu once, thats step 1now step 2 you press these but not fast press 4 and it should go to another menu screen then press 1 and it will go to another screen then press 4 again, then choose english and it will then be in english ok,if your unsure do the following, switch fone off then back on, when its loaded up and come on press the menu button, then press 4 then press 1 then press 4, now choose english and you will be back in english, give me a shout back if you have any problems ok
Let me give you a little background and then some solutions. This is generic because I don't know your carrier. I'm useing ATT as an example.
Phones are naturally unlocked, but a service provider might lock them
When originally manufactured, all GSM cell phones are unlocked. That is, they can be used with any SIM from any cellphone service provider - always assuming, of course, that the cellphone service provider has compatible GSM service on the same frequency bands that the phone can operate on.
Most cell phone service providers electronically 'lock' the phone so that it can only be used with their service. There are obvious reasons why they choose to do this - in particular, to force you to pay what are usually very high roaming charges when you take your phone out of their network and use it elsewhere in the world.
Fortunately, this locking is reversible. With some phones, it is possible to simply enter an unlocking password code into the phone and it is immediately then unlocked. Other phones need to be connected up to a special unlocking data terminal.
Your phone has to be unlocked by the carrier. LG, Motorala, Sony Ericsson, Nokia and most of their ilk, will not give consumers the unlock codes but don't despair.
A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your carrier. For example, if you have AT&T to unlock your SIM card, you can obtain your phone's PUK code from AT&T by:
● logging in to your myWireless Account online ● using their Technical Support Chat ● calling Customer Care at 1-800-331-0500
To get your phone's PUK code online from ATT:
● Log in to your myWireless Account. ● Select My Services under My Account. ● From the My Services screen, select My Phone/Device. ● Select Unblock SIM Card. ● The Unblock SIM screen will display your PUK code.
Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code.
Note: If you enter the wrong ATT PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator."
There are three other ways to unlock a phone:
● The carrier will unlock the phone for you at one of its retail outlets; ● You can do it yourself by clicking on this link Free Unlock Codes , ● Pay $3.89 at the following website: www.theunlockshack.com/.
I trust that this is helpful and solves your problem. All the best
