First All Check:1.Confirm whether same sim card is working in other h.s or not.2.Make sure the sim slot is o.k. only try these two.3.If all the above steps fails, check the SIM card connector pins for damage.if so try to get serviced. 4.if ur sim card is good then it is problum form sim card ic u have u raplace it with SMD.u can make it jumper mean u can fix this prob with out sim card is for this contact.5.take sim connector slight up by pin then cheak by inserting sim.6.hot air gun on sim i.c. then cheak it.Last Option:IF make sure that the sim card hasn't been damamged at all sO Please You Go to Service& Sim Office and Get the Duplicate Sim Same Your No From Office OpratorProblem will Solved Quickly
hi to purchase sim unlock code visit mobileunlocksolutions.com here they ask you the network provider name to which your mobile is locked and the imei number of your mobile .finally they deliver you codes to unlock your mobile.
Restriction code for a mobile depends upon the network to which it is locked to. So you must specify the network too. Anyway you can have a try at www.mobile-unlocker.com this site provides accurate unlock codes at affordable cost. You can get the unlock code for your Nokia 6500C too from here.
Hi, - To unlock you Nokia 6500 (if forgot or lost lock code) you can unlock it using a master code. - To get the master code i need the IMEI code of your mobile phone. - With the help of this IMEI code we can get the master code of your mobile and unlock the mobile and reset it with a new password. - The IMEI number can usually be found on the sticker underneath the battery or by typing *#06# into the phone keypad.
Hope this helps, please rate and leave a comment if the solution was helpful, thanks!
high, all you need to do is the following, make sure the phone is on its first screen, ie so it looks like it does when your about to make a call,now press menu so it brings up the menu screen, so just press menu once, thats step 1now step 2 you press these but not fast press 4 and it should go to another menu screen then press 1 and it will go to another screen then press 4 again, then choose english and it will then be in english ok,if your unsure do the following, switch fone off then back on, when its loaded up and come on press the menu button, then press 4 then press 1 then press 4, now choose english and you will be back in english, give me a shout back if you have any problems ok
Let me give you a little background and then some solutions. This is generic because I don't know your carrier. I'm useing ATT as an example.
Phones are naturally unlocked, but a service provider might lock them
When originally manufactured, all GSM cell phones are unlocked. That is, they can be used with any SIM from any cellphone service provider - always assuming, of course, that the cellphone service provider has compatible GSM service on the same frequency bands that the phone can operate on.
Most cell phone service providers electronically 'lock' the phone so that it can only be used with their service. There are obvious reasons why they choose to do this - in particular, to force you to pay what are usually very high roaming charges when you take your phone out of their network and use it elsewhere in the world.
Fortunately, this locking is reversible. With some phones, it is possible to simply enter an unlocking password code into the phone and it is immediately then unlocked. Other phones need to be connected up to a special unlocking data terminal.
Your phone has to be unlocked by the carrier. LG, Motorala, Sony Ericsson, Nokia and most of their ilk, will not give consumers the unlock codes but don't despair.
A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your carrier. For example, if you have AT&T to unlock your SIM card, you can obtain your phone's PUK code from AT&T by:
● logging in to your myWireless Account online ● using their Technical Support Chat ● calling Customer Care at 1-800-331-0500
To get your phone's PUK code online from ATT:
● Log in to your myWireless Account. ● Select My Services under My Account. ● From the My Services screen, select My Phone/Device. ● Select Unblock SIM Card. ● The Unblock SIM screen will display your PUK code.
Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code.
Note: If you enter the wrong ATT PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator."
There are three other ways to unlock a phone:
● The carrier will unlock the phone for you at one of its retail outlets; ● You can do it yourself by clicking on this link Free Unlock Codes , ● Pay $3.89 at the following website: www.theunlockshack.com/.
I trust that this is helpful and solves your problem. All the best
As you said in the question your mobile is not charging. *Your charging socket as problem. *You need to change that socket. *You can visit to your nearest service center for repair. *They will take few minutes for this.
You can also charge your mobile by using battery charger.There you should remove battery from the phone and then you should charge the battery. Thanks for your question.