Dual Electronics CECT P168 Cellular Phone - Answered Questions & Fixed issues

i) usually browser in some mobiles donot support frames(web pages are usually build using frames), so instead of using ur inbuilt browser......try to use an external browser from internet

try download "opera mini 4.2" using the website "http://www.opera.com/"(if your phone supports java applications) and copy it to ur memory card(phone memory card)

ii) it will install on ur phone, you will get enriched experience of browsing, which would be similar to browing on ur computer..........



Thanking you

M. Sridhar

That app is likely only testing the network speed of your iPhone, and if you're using a cellular connection instead of WiFi, the results will depend heavily on which provider you're with and they're coverage in your area.If you're using the same WiFi on all your devices, the iPhone 5 should not be slower than other iPhones, there are multiple reasons as to why it is getting slower speeds however.If you're running the tests at the same time, they may interfere with each other so run them one after the other.If you're already doing that, your router may be prioritising the other devices over your iPhone 5, assuming other devices are using the internet at the same time.

Hi,
do a search on ebay for 'invalid sim'.

Do another reset. That one did not work.

Try a different card. Half the time the help desk give you wrong info to get you off the phone.

ur digitizer is broken...if u brought it from a store u kan go bak 2 dat store and git it fixed 4 like $10 to $15

dear,

this issue directly related with the charging circuitry... the issue can either be with the charger itself or majorly with the charging ic ...

i had faced this problem with the chinese mobile phone but this can be either with the chinese model or can be with the other...so check the both things one by one...hopefully the issue will be resolved..

regards,

dont forget to rate this if issue resolves.....

You need to have MMS settings on your phone to receive a MMS , your data plan should be on active status for data(Internet) usage.

yes it really protect the touch screen from scratches and spotted.. some good quality screen guard have anti dust and radiation quality also.

all you need to to is to delete the old APN as access point name and then put in the new one so that you can access it directly on your mobile if you are using the sim mode.

SEND ME A CECT P168 IF IT IS SO GOOD PLEASE!

Hi,if you want to unlock a Huawei G7010 Mobile Phone from network lock visit the site SuperUnlockCodes.com here they are providing the unlock code at low cost with easy step by step unlocking instructions.Using that you can unlock your phone easily.This is the easy,safe,fast and permanent unlocking method.

check if your sim card a GSM or 3G ?iphone clone support GSM onlycontact at&t, but i dont think they could exchange it for you.is your sciphone the quad band one?Check http://chinamanuals.comthey have a manual with major provider settings (also AT/T)

Unlock Cell Phones Your cell phone may be locked to a particular cell phone provider and in this case it needs to be unlocked to use with a different cell phone service provider. To get the security code/restriction code to unlock the cell phone from the current cell phone provider so you can use the SIM card with a different phone provider, Please click on this link and follow my instructions :- http://www.fixya.com/support/r4049238-unlock_cell_phone If your phone provider does not help you then these WEB sites it provides security codes for a small price. http://www.mobileunlockstore.com/?gclid=CKDb2_y2558CFSlJagodxBkDHw http://www.mobileunlocksolutions.com/ http://www.superunlockcodes.com http://unlockcellphonecode.com/

hi mate,just follow these instructions 1. make sure to have 2 sims in phone(do not use 3g sims) 2. make sure wlan is disabled 3. enter engineer mode (type in *#3646633# 4.scroll up not down to number 10 RF test tool 5.choose gsm touch ok verify ok touch power scan 6.select band dcs 1800 press ok phone will go to test looking for DES(frequencies) wait until phone crashes or seems inactive(can take 3 to 15 min) press the end button (red one) phones with one middle button use that one phone will go off turn on phone and it will be reset to flight mode....(you can try to make call to verify,phone wil say cannot make call,not, not allowed to dial like before) go to settings and network setup,sim1 network setup,prefered mode and select gsm prefered...(phone will now change mode unlike before saying unfinnished) try the phone to make a call (should be no prob now) not finnished though .... go into settings again select restore factory settings (password 1122) wait for phone to restart...now its all done .....now you can change your tones and turn wlan on etc do not for any reason select wlan only or gsm only again...

My Dear Your Phone Keypad IC Default So Please change Keypad IC And Keypad Problem will Solved

Guys I had the same problem with the k599 Sciphone and none of the solutions found on the internet helped me. New chinese models tend to restart after testing is over and this results in turning the wifi application on. So I spent many hours on thinking how to bypass this function and this morning I woke up with an idea that really worked!! The steps are quite similar with the ones followed to debug older models:

put 2 chips on cell
Disable WLAN.
1-enter in factory mode *#3646633#
2-go to RF Test Tool
3-choose GSM, confirm OK!
4-go to Power scan
5-Select Band DCS1800 click OK
6-the cell frozen
7-wait for 3 minutes testing
8-while testing connect to a pc using the USB cable (do NOT select ANY of the options appearing on the cell screen)
9-Click the CENTER button of the cell until you go back to principal menu
10-go to settings/network settings and choose GSM Preferred or any other option (except WLAN only!!)

In this way the cell does not reboot, and the wifi application stays off, so the option can now be changed...

Hope this helps!

Greetings from Greece!

e-mail me to [email protected] if any questions..

Click SETTINGS
Click Dual SIM Settings
Take your pick of DUAL SIM OPEN, ONLY SIM1 OPEN, or ONLY SIM2 OPEN

Hope it works...

try 0000 or 00000.it may be the default code for most phones

Guys I had the same problem with the k599 Sciphone and none of the solutions found on the internet helped me. New chinese models tend to restart after testing is over and this results in turning the wifi application on. So I spent many hours on thinking how to bypass this function and this morning I woke up with an idea that really worked!! The steps are quite similar with the ones followed to debug older models:

put 2 chips on cell
Disable WLAN.
1-enter in factory mode *#3646633#
2-go to RF Test Tool
3-choose GSM, confirm OK!
4-go to Power scan
5-Select Band DCS1800 click OK
6-the cell frozen
7-wait for 3 minutes testing
8-while testing connect to a pc using the USB cable (do NOT select ANY of the options appearing on the cell screen)
9-Click the CENTER button of the cell until you go back to principal menu
10-go to settings/network settings and choose GSM Preferred or any other option (except WLAN only!!)

In this way the cell does not reboot, and the wifi application stays off, so the option can now be changed...

Hope this helps!

Greetings from Greece!

email me to [email protected] if any questions