20 Most Recent Linksys WRT160N Wireless Router - Page 7 Questions & Answers

just do a hard reset and that will restore ur router to its factory settings...

http://pcsupport.about.com/od/linksys-default-passwords/a/wrt160n-default-password.htm hope this helps...

move ur phone r router... best solution is to change the channel ur router is on...go into ur router setup page and go into the wireless setting and change the channel to something different...please vote if this helps.

http://homesupport.cisco.com/en-us/support/routers/WRT160N

select version 3 and follow the instructions...please remember to vote...u might also want to try out network magic ( http://www.purenetworks.com/download/ ) dont buy it is free with any linksys router...

To enable the port you need to log on to the router then the setup and look for ports. You will have to give it a name, the port number and tell it is a tcp. Then just save/apply.

It is pretty easy to do and you will find a few already in there to look at. This is covered in the user manual and you can pull up the help if needed on the page. It really is just a matter of filling in the blanks and hitting apply.

Please provide more information! You mean that you cannot access the settings page or the security tab once you enter the settings page?

@joea1956

Try the following:

1. If you want WPA2 encryption on your router, (which also have higher security and compatibility issues with wireless cards), you could try WPA2-TKIP (which is standard encryption and made compatible for all wireless cards) or WPA2-AES (for specific wireless cards that are unable to connect to TKIP encryption)

2. If Step 1 won't work, try to lower your security encryption to WPA-PSK (either TKIP or AES) and try again. If this works, your IPAD2's wireless card doesn't support WPA2 encryption yet.

If all of the above fails, I do not recommend WEP since it's easily cracked (for advanced users) but you could try it as a last resort.


Good luck.

Click the link below:

Linksys wrt160n

Click "Downloads"

Click the dropdown menu and choose version 3.0

Scrolldown and download the Setup Wizard that is right for you.


Rate my answer if this helped you.

Reset your router back to it's factory settings by holding the reset button for about 5 seconds. I have provided a list of the most popular router brands. If it does not work you may need to google what your specific model's default IP address/default username/default passwords are, for example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it can depend on where you obtained your router. If you purchased it yourself from a store then the standard defaults should work. If you obtained your router from your Internet Provider you may need to contact your service provider. It also may depend whether it's an old or new model router as well. And you may need to press and hold the reset button on your router several times before it actually clears. Make sure you have a wired connection then once you have accessed your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is: 192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or 192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

Here you can find the owners manual: http://homesupport.cisco.com/en-us/support/routers/WRT160N
I would, however, suggest that if you are not comfortable setting it up that you either request a chat or have a professional set it up for you.

If you have a wireless router and it is connected to the DSLor cable modem then - To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.

Hi

Reset the router using the reset button or pushplate at the back, this sets it back to the Factory Default Username and Password settings, which should be printed on the rear or underside of the router or in the manual (if you have no manual you can download a PDF manual from:

http://www.starbatteries.com/liwrwiroinma2.html

or

cna1.upc.edu.cn/cisco/tools/WRT160N_ug.pdf
Then install it again, creating a new password.

This time, e-mail the password to yourself and/or save it in your cellphone.

Hope this helps

you need to disable the the firwal option or allow the voip port in your router.

Hellosep49,
I've given you a "Link to the Website, where you can,
"Download the Manual," that has all the information."
"How to Setup the Router, with complete: (Diagrams)."

First, make sure that the you choose the 'correct' {Router#} download!
Scroll-down the (page), until you see the "Router#. that matches yours."
There will be a {List}, to choose from!
This way, you'll be able to get the right "Manual."
Next, download the [File].

If you need help with anything else?
"Write a 'comment'; I'll be here to assist you!"
"Best Regards"
Click here for "Drivers"
http://homesupport.cisco.com/?pagename=HS%2FCommon%2FDynamicWrapper&site=HSus&application=HS&locale=en_US&ppath=supportsearch&c=Page&support_keyword=Linksys+WRT160N&lang=en&keywords=Search+Support

use www.portforward.com use the instructions set for port forwarding. to access your network under admin. its usually admin/admin. being username/password. or admin for password nothing for user. have to open internet explorer and type in ip address and it will take you to a screen to login as administrator.

FixYa Support

Try this hard reset method:

• With the unit powered on, press and hold the reset button on back of unit for 30 seconds

• Without releasing the reset button, unplug the unit and hold reset for another 30 seconds

• Plug the unit back in STILL holding the reset button a final 30 seconds

how far is your computer to the DSL wireless router? If it is too far and signal becomes to weak you won't be able to connect. And also make sure that there is no metal, concrete wall in between, it will block signal too. Good luck Thanks

the least you can do is set WEP key( in router config) to access the wifi router/AP ( access point). this will prompt client/s to enter password/key if they want to access internet via your router.good luck

To connect to your wireless router, the router's wirelesssettings needs to be configured with the SSID, encryption etc. and also thewireless cards in all the laptops/computers needs to be configured with theserouter's wireless settings. Then the laptops/desktop computers can communicatewith your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default PW (write it down and putit in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Try using the cd that came with your router, it will reset u your router and make your wireless secure, if you do not want to do that and want to do it manually do the following.
Go to this link and follow the instructions starting on page 11.
http://cna1.upc.edu.cn/cisco/tools/WRT160N_ug.pdf