20 Most Recent Remington Electric Chain Saw - Page 9 Questions & Answers

its for oil to lube the chain and bar

In answer to request Warren:
Master Distributors
http://www.masterparts.net/remingtonelectricchainsaw.html
$16.99 above.

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

You can purchase parts by calling 1-800-654-8534

Call 1-800-654-8534 for parts

I happen to have an IPL for your saw. This may be helpful Colin.



If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

Our local Ace Hardware store has a box of different sizes of motor brushes. See if a store in your area has one or can obtain one. Check with an electric tool repair facility to see if they may have something similar that fits a drill or other appliance. Good luck! (buy extras!)

Good news Victor;
Both a bar and 3 different chains are available through an Oregon dealer. The green chain (hover the cursor over the color and there is an explanation) is most likely what your saw came fitted with but all will work, the choice is yours.
Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
I input "Remington; M15014AS; 14"; All; All; All".

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

If a solid nose bar it needs to be slightly more slack. Judging by the number of requests for adjustment repair kits I suspect it could be beefier initially too.
In answer to your question, with a solid nose bar the chain at the center bottom should just touch. If sprocket nose touch plus 1/8 turn tighter.

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

50 drive links; 3/8 pitch; and 0.050 gauge if an original 14" bar your, choose your chain here:
Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
Input "Remington; EL-1; 14"; All; All; All"
The one installed is probably green (low chance of kickback), all of them will work provided it is the original bar.

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

It depends on which saw you have. Are you aware they are no longer in production? Eventually a replacement part will not be available.
You do not give us the model number of your saw to verify this will fit.
Remington.com
http://shoppingcart.msservicecompany.com/Default.aspx
• Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search.
• Click the "YourModelNumber" - Remington Electric Chain Saw "View Model" link.
• Click "View Owners Manual" or "View Illustrated Parts Diagram" link.
• Type "YourPartNumber" into the "Search for your parts by Part #:" window, then click search.

A tension repair kit is available here:
MasterParts.com
http://www.masterparts.net/Merchant2/merchant.mvc?Screen=PROD&Store_Code=MPD&Product_Code=108640-MD
Part number 108640-MD; DESA SPECIALTY PARTS: KIT, ADJUSTMENT SCREW FOR SPROCKET COVER (REM-18); $5.95.
Kit fits the following covers: 108640-01, 116675-01 and 108641-02 (note: for the 108641-02 the screw will adjust from the front with a screw driver, not with a thumb screw at the back) KIT INCLUDES: screw, clip & adjustment block. If not available here please reply (below) with that information. TIA

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou

Are you aware Remington(Power) is no longer in production? Eventually a part will be needed that is not available outside of eBay.

Your saw may be repairable, start a parts search here (make note of all part numbers):
Remington.com
http://shoppingcart.msservicecompany.com/Default.aspx
• Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search.
• Click the “YourModelNumber” - Remington Electric Chain Saw "View Model" link.
• Click “View Owners Manual” or "View Illustrated Parts Diagram" link.
• Type "YourPartNumber" into the “Search for your parts by Part #:” window, then click search.

If parts above are "NLA" or "Back Ordered" try them here:
Master Distributors
http://www.masterparts.net/remingtonelectricchainsaw.html
If parts are available but the cost approaches 50% the cost of a name brand replacement weigh your options please.

We rarely get questions about McCulloch or Poulan, and Wen made a quality product in the past, they are again in production. I cannot vouch for the quality today and they may go the way of Remington, Again your decision. Good Luck.

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

Are you aware Remington is no longer in production? Often eBay is the sole source for replacement parts. A local Husqvarna or Stihl dealer may have a suitable substitute. Take your cover, they are most helpful weekdays before 1500.

You do not give us the model number of your saw to verify this will fit.
Remington.com
http://shoppingcart.msservicecompany.com/Default.aspx
• Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search.
• Click the "YourModelNumber" - Remington Electric Chain Saw "View Model" link.
• Click "View Owners Manual" or "View Illustrated Parts Diagram" link.
• Type "YourPartNumber" into the "Search for your parts by Part #:" window, then click search.

A tension repair kit is available here:
MasterParts.com
http://www.masterparts.net/Merchant2/merchant.mvc?Screen=PROD&Store_Code=MPD&Product_Code=108640-MD
Part number 108640-MD; DESA SPECIALTY PARTS: KIT, ADJUSTMENT SCREW FOR SPROCKET COVER (REM-18); $5.95.
Kit fits the following covers: 108640-01, 116675-01 and 108641-02 (note: for the 108641-02 the screw will adjust from the front with a screw driver, not with a thumb screw at the back) KIT INCLUDES: screw, clip & adjustment block. If not available here pleasse reply (below) with that information. TIA

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou

Are you speaking of the adjust ment screw or the bolt that holds the bar on, regadless here is a web page that will direct you to a dealer who carries the chainsaw parts.
http://www.masterparts.net/remingtonelectricchainsaw.html

You do not give us a model number to verify this will work on your saw.
Remington.com
http://shoppingcart.msservicecompany.com/Default.aspx

• Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search.
• Click the "YourModelNumber" - Remington Electric Chain Saw "View Model" link.
• Click "View Owners Manual" or "View Illustrated Parts Diagram" link.
  • Type "YourPartNumber" into the "Search for your parts by Part #:" window, then click search.

A tension repair kit is available here:
MasterParts.com
http://www.masterparts.net/Merchant2/merchant.mvc?Screen=PROD&Store_Code=MPD&Product_Code=108640-MD
Part number 108640-MD; DESA SPECIALTY PARTS: KIT, ADJUSTMENT SCREW FOR SPROCKET COVER (REM-18); $5.95.
Kit fits the following covers: 108640-01, 116675-01 and 108641-02 (note: for the 108641-02 the screw will adjust from the front with a screw driver, not with a thumb screw at the back) KIT INCLUDES: screw, clip & adjustment block.

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou

Black & Decker GK1630T Type 1 Chainsaw Spare Parts
http://www.mtmc.co.uk/prodtype.asp?PT_ID=12708111
Item 147, only someone that can see the item in question can determine whether just the cap or the repair kit is needed. If in doubt order the kit, if not needed it will be on hand when it is.

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Remington is no longer in production. Often eBay is the only source for replacement parts. The motor for any model Remington cannot be found. We rarely get questions about McCulloch or Poulan electrics, I suspect a much higher quality saw that will need few if any replacement parts. Wen is back in production, they used to be a quality product they might be worthy a critical inspection. $22 would be a god start toward a replacement saw.
I added one to my shopping cart here.
Master Distributors
http://www.masterparts.net/remingtonelectricchainsaw.html

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Your welcome.

These fit a model M35016 saw. Please verify they are what you need.
http://www.masterparts.net/Merchant2/merchant.mvc?Screen=PROD&Store_Code=MPD&Product_Code=107711-01
I think in a pinch some metal tubing of the correct ID could easily fabricate these.

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Almost certainly, it got hot and some motor windings shorted. Try a different extension cord and an outlet on a different circuit breaker. Try connecting directly to the saw plug.
Motor parts are all NLA with on exception here:
Master Distributors
http://www.masterparts.net/remingtonelectricchainsaw.html
The replacement requires complete motor replacement and displays no dollar amount.

Remington.com
http://shoppingcart.msservicecompany.com/Default.aspx

• Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search.
• Click the “YourModelNumber” - Remington Electric Chain Saw "View Model" link.
• Click “View Owners Manual” or "View Illustrated Parts Diagram" link.
• Type "YourPartNumber" into the “Search for your parts by Part #:” window, then click search.

Are you aware they are no longer in production? Often eBay is the only source of replacement parts.

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

I input "Remington; EL-1; 14"; All; All; All" here:
Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
It returned "91VG050G, 91VX050G or 91VXL050G". Please read the triangular warning placards. The original chain is most likely green.

Column 4 says a 14" chain has 50 drive links (the part in the bar groove". Please count them, if you get a different number try a different length bar. The Oregon part number can be ordered on line or if given to a local merchant fabricated in their facility.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou