Akai Mpc2500 Music Production Center - Answered Questions & Fixed issues
Help with using usb chord and sony vaio lap top.
Have you tried a different usb port or different usb cable also boot off your laptop and connect then connect the mpc 1000 and boot it up also make sure you have install the correct software for it
6/26/2012 1:54:52 AM •
Akai Mpc2500...
•
Answered
on Jun 26, 2012
•
87 views
Can a dvd player be
The unit is designed for a CD unit. While a DVD player MIGHT work as a CD read and burner, it would not likely burn DVD's or read them.
5/28/2011 10:42:04 PM •
Akai Mpc2500...
•
Answered
on May 28, 2011
•
96 views
Im trying to connect my
Check if the Mbox2 has an echo setting that echos the audio from its input. If you want the audio to loop through the PC then it will have to echo there instead. Check that in "Sound and devices" of the PC are all set to transfer via the MBox for voice and playback instead of the internal PC audio system.
4/12/2011 7:13:55 PM •
Akai Mpc2500...
•
Answered
on Apr 12, 2011
•
253 views
How do you wipe out
from the akai forums:
to set the os back to factory settings press and hold the erase key till the mpc has booted to the main screen.
to
erase the harddisk goto either the load or save screen and then choose
utility - there you will find the option to format the hdd.
you
can also format the drive (or any inserted compact flash-card) from your
computer thru the usb connection, but it is recommended to use the
internal format because the mpc can be a little picky when you format it
from the outside.
at first i would check if there is any folder
or the internal memory is set to autoload and just turn that of or point
it to another folder of you choice. that way you can keep the factory
delivered sounds. maybe you want to use them later, even if it is just
to explore the mpc. the factory sounds can be also downloaded later, but
be advised that there are different iterations of the stock sounds,
depending on whether your mpc shiped with a 32 or 128mb compact flash
card.
also the mpc os is not on the harddrive but in the internal
memory. to check the version hit mode-> pad10. latest official
version is os 1.24. if your main srceen looks different than in the
manual check double and triple before you do anything, because the
previous owner might have installed the third party jj os which comes in
different versions. some of them cost a lot of money! if you find this
check the other forum here for the alternative os.
3/5/2011 6:54:25 PM •
Akai Mpc2500...
•
Answered
on Mar 05, 2011
•
493 views
I connected my mpc to
Add the new inout to a different track, then merge the old plus the added track.
10/11/2010 9:56:07 PM •
Akai Mpc2500...
•
Answered
on Oct 11, 2010
•
79 views
My mpc 2500 always stucks
If you flashed a bad OS, the unit MAY have to go to the factory to be reloaded.
Go to VSPlanet.com and see if someone there might be able to help.
9/6/2010 3:25:07 PM •
Akai Mpc2500...
•
Answered
on Sep 06, 2010
•
1,078 views
I purchased an akai mpc 2500 used and it came with
Try holding erase while you turn it on. You may have to turn off autoload also. You'll have to read the manual first ( pages 110 and 114 especially ) available here:http://www.mpcsounds.com/download_akai_mpc_manual.php It depends I think on whether the previous user saved to memory card or the internal HD.
8/31/2010 3:39:15 PM •
Akai Mpc2500...
•
Answered
on Aug 31, 2010
•
407 views
Loading an MPC5000 with midi files
if the mpc has GM soundbank then this should be possible. You might be better off recording the audio from a suitable GM unit first of all before gigging with it, then you can make it sound the way you want and change the key to suit etc.
5/6/2010 2:31:03 PM •
Akai Mpc2500...
•
Answered
on May 06, 2010
•
267 views
One sound cancels another sound out.
You MAY be saturating the circuits and/or the summing section.
There is only so much dynamic range available in both the analog and digital sections.
The kick can have a very high level so one must keep the PEAKS within the input specs for this device.
When mixing, the kick level must be kept from saturating the digital level. This is a problem of the dynamic range of the kick versus the rest of the program.
4/21/2010 1:53:53 PM •
Akai Mpc2500...
•
Answered
on Apr 21, 2010
•
82 views
Os update promblems mpc 2500
Try this site:http://www.akaipro.com/mpc2500 Try downloading all the the release notes for ver.1.24 if you haven't already. Download the ver.1.24 which seems to be the newest to your computer first and install from there. It might have gotten corrupted the first time you tried it. You will have to email them using the form for the newest release notes and the installation instructions:http://www.akaipro.com/mpc2500 http://www.akaipro.com/content1924.html and http://www.akaipro.com/mpc2500 are the URLs you need. Hope this helps.
4/16/2010 7:12:08 PM •
Akai Mpc2500...
•
Answered
on Apr 16, 2010
•
647 views
Why does my akai mpc2000xl take so long to boot up
This can have to do with several things. You might have a lot of sounds installed and have a lot of projects that you are working on. You can also have a small memory that is not improving the boot. You can expand your mpc memory, take a look at the link for an example:
http://www.edgetechcorp.com/memory/upgrade.asp?cid=25213
3/10/2010 12:34:25 PM •
Akai Mpc2500...
•
Answered
on Mar 10, 2010
•
179 views
How do i load and chop samples
Try asking these guys( they'll help even if you didn't purchase there):http://www.sweetwater.com/store/detail/MPC2500 Also I'd recommend joining this forum:http://www.mpc-forums.com/
3/4/2010 6:22:37 PM •
Akai Mpc2500...
•
Answered
on Mar 04, 2010
•
110 views
Mpc 1000 beginner
Here is an excellent source of info:http://www.mpc-forums.com/viewforum.php?f=15 Consider joining and posting any questions you have. Forum members are happy to help and have usually had the same problems at one time or another.
1/21/2010 11:58:14 PM •
Akai Mpc2500...
•
Answered
on Jan 21, 2010
•
737 views
Not finding what you are looking for?