Top 20 Sony HVR-HD1000U Camcorder Questions & Answers

hi, the tape deck mechanism is faulty, the remedy is to change the mechanism. if you can repair it open take out the mechanism, remove the head, eject housing,and the sensors mechanism locking plate etc, then peel out the flexible cable from the mechanism, and change it.

hi, the fault should be in side the cam, start test from the charger connecting socket, measure the power in the mother board, if any of the fusible resistor or the regulator SMD found faulty, must replace.

hi, the fault should be in side the cam, start test from the charger connecting socket, measure the power in the mother board, if any of the fusible resistor or the regulator SMD found faulty, must replace.

Your owners manual will show you on page 74 how to connect the iLink cable between the camera and computer. If you have lost the manual, it is downloadable for free.

hello, i think the tape tab is jammed if you will need help to: Disassembly,Repair, Maintenance or adjustments and more you can download the factory service manual from the below link:http://goo.gl/ubSnDGood Luck

This is usually caused by an oxidized or defective Audio/Video drum. Try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be serviced by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Hello.
This problem is solved by replacing the cassette complet mechanism, part number A1437006A MD (N220) SUB ASSY (S) A
... the cause: the flex is broken.
you can buy it on this website: https://www.servicesplus.sel.sony.com/sony-part-number-A1437006A.aspx

Hollmann.
[email protected]

You will need a cleaning cassette- the same type that you record on, but with a cleaning tape in it instead of recording tape.

Hi,

Buy it from :-

https://www.servicesplus.sel.sony.com/groupid503401.aspx

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

No Sony camera will work with Win 7 as yet (with USB cable) however Firewire cables do work okay?

First and foremost shut down the device. Remove the battery if possible for 1 minute. Then restart/power up device. If still no luck or response. Go into the setting and look for the reset to default setting if there is no option for touch screen controls. Best of luck

This machine dates back to 2007. I suspect most of the organic electrolytic capacitors are either leaky or short circuit and there are many. A Sony Service Centre may be able to repair it for you.

That means the mechanism is either jammed or there is no control. Due to its age it may be a problem to get it going again due to leaking capacitors from lack of use or age.

Question edited for clarity and toss in CAPS. A professional camera especially a Sony, should be professionally repaired IMHO. https://www.google.com/search?q=sony+dsr+pd170+blank+screen+problem+solution

The heads in your cassette might either be misaligned or dirty or need to be replaced.

It sounds like your Sony DCR-DVD108 camcorder may have a problem with the battery or the power connection. For the battery issue, you can try replacing the battery with a new one that is compatible with your camcorder. The Sony NP-FP50 or NP-FP70 are compatible batteries for your DCR-DVD108. You can purchase them online or from a camera store. As for the "Movie Disabled" message, it may be caused by the type of disc you are using. The Sony DCR-DVD108 camcorder is compatible with DVD-R and DVD-RW discs, but it may not be compatible with all brands of discs. You may need to try using a different brand of disc to see if that resolves the issue. Additionally, make sure that the camcorder is set to the correct recording mode, such as video mode, and that there is enough space on the disc to record the video. If none of these solutions work, there may be a problem with the camcorder itself, and it may need to be repaired or replaced.

It needs servicing at a Sony Service Centre. You can't fix electronics and servos at home unless you have equipment. There is a video here, because it in a known issue.

Help here. Compare specs, but why not just buy the right one. 420 https://www.google.com/search?q=SONY+CCD+FX420+charger 620 https://www.google.com/search?q=SONY+CCD+FX620+charger ..

Replacing the flex cable on a camcorder can be a delicate and complex process, as it requires disassembling the device and accessing its internal components. Here are some general steps that you can follow:

1. Turn off the camcorder and remove the battery.
2. Locate the screws or clips that hold the casing of the camcorder in place. Depending on the model, these may be on the bottom, sides, or back of the device.
3. Carefully remove the casing and set it aside.
4. Locate the flex cable that connects the LCD screen to the circuit board. It may be taped or clipped in place.
5. Gently disconnect the flex cable from the circuit board and LCD screen. Take note of how it is connected so that you can reattach the new flex cable correctly.
6. Install the new flex cable in the same position and orientation as the old one.
7. Reconnect the flex cable to the circuit board and LCD screen.
8. Replace the casing of the camcorder and secure it with screws or clips.
9. Reinsert the battery and turn on the camcorder to test the LCD screen.

It's important to note that the specific steps and tools required for this process can vary depending on the make and model of your camcorder. Additionally, if you're not familiar with electronics repair, it's generally recommended to have a professional technician perform the repair to avoid damaging the device or injuring yourself.

1. Press the
2. Use the arrow keys
3. Select "Display" from the setup menu
4. Use the arrow keys to navigate to "Time Code" and select "Off" to turn off the timestamps.
5. Press "Menu" again to exit the setup menu.

If you don't have the original remote control for the tape deck, you may need to purchase a universal remote or a replacement remote that is compatible with the EV-S1500 in order to access the menu settings.