20 Most Recent Canon FS100 Flash Media Camcorder - Page 4 Questions & Answers

This is usually located on the bottom surface of the cam. If not try removing the tape and looking underneath. Thanks, Dana

this is more likely to be an issue with your computers monitor settings rather than the video itself. try burning to disk and viewing on you TV you should find no problems

I also am facing the same problem. Even the videos can be played in PC, then don't give any sound at all. And I have no idea about it too. Really stuck at that point. Another thing is; how to disconnect the camcorder from PC although I remove the hard disk of it via safely remove, as it always warn "PC connected, WHILE THE CAMCORDER IS CONNECTED TO A PC DO NOT DISCONNECT THE USB CABLE OR POWER SOURCE, CANNOT TURN OFF POWER OR CHANGE MODES" in its display LCD. So, What I am gonna do???? Actually for transfering the images and videos from your camcorder to PC is; you need to install PIXELA ImageMixer 3 SE first, which is aldy in your kit. Then, you can edit and browse the videos and images from your camcorder.
P.S: If somebody knows how to solve these, please share the solutions. Thanks! Am I wrong to purchase that Canon FS200 because of its external audio jack(whereas others don't have that access), compact design and reasonable pricing ?

Do the "student computers" have memory card readers on them? If so then try to have the computers read the memory card through Windows Media Player or some other similar software lik4e Real Player.

You have to change the flex wire connecting LCD with camcorder. I got from the repair shop.
It's worth it' it's very common problem with LCD.
Good luck
Meggita

Format the card while it is the camera.

Hi mate, I had same problem as you, took the cam into store and teh guy helped me out.

Make sure you get the recharger for the camcorder, then plug it into teh camcorder and also to the wall power when you are uploading the files. It can needs an extra power boost to get the files onto your computer.

- so plug in your camcorder to computer
- also plug in the battery recharger cord to the camcorder

Should work fine!!

check the limitations of the camera specs. might be a firmware update or software fix.

then if that fails meow at it.

We have this lcd in stock for relacement

The computer is no longer detecting the camcorder for several reasons. It could be the ports on the computer, it could be the cable that you're using to connect the camcorder to the iMac, or it could be the camcorder itself.

Try connecting the camcorder into different USB or FireWire port of the iMac.

Try using different cable.

Try connecting the camcorder into different computer to test the device.

If all else fails, power cycle the camcorder by turning it off and remove the battery for about 10 minutes. Then turn it back on. Otherwise, contact the manufacturer for second opinion.

Hope these helps and have a great day!

canon support download find model and download

The subinstaller is a program that launches the screen from where you can select to install all the applications available in the disk. You need not install the subinstaller as it itself is an installer for different applications and drivers on the disk.

Hi

Thanks for using FixYa. First check whether the disk was finalised. Usually the disk is finalized before ejecting, otherwise the data can get deleted. You can browse the dvd through finder window, and you'll be able to read all the videos and pictures stored on your DVD.


Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

I found another serial number under the batteri, and then it worked out fine.

use a memory stick reader & delete the files/info in your computer

the easier way its to go on the actual folder and copy /paste ...but ...the actual way ...is to select it just like a picture..and then download....I believe you used only the automatic download until now...but if you cancel that ...it will either open the folder prompt to ask you what to do ...just like you insert a cd...and there select open folder...and copy manually ...or ...open the manager ...select import from device ..and there look for the folders(browse) where the videos are ..it is usually a different one on the card..
...also if you cancel the initial download....you will find the camera storage (SDcard) into the My computer ...as a removable device ......act with it as any other moving from folder to folder...beware if you select cut ...this will remove from the card permanently ...the file

Are you connecting the audio RCA cables to the camera and TV and selecting the correct audio input ?

I had a similar problem with missing audio. In my case I am using a surround sound audio system and had to connect the audio cables directly to the Suround sytem and change the audio input.

USB bad. If the footage is on hard drive rather than tape just browse the camera or import rather than capture. If difficulties seeing the hd maybe use a card reader known to work with mac. If it is on DV tape you need to connect to a dv / hdv out to fire wire, if this camera doesn't have one you will need to borrow some one's who does.

This from Canon support relating to the HF10. Replacing the first 3 digits with 808 worked for me; Dear Mr , Thank you for contacting Canon. I am uncertain as to what you are trying to register for. Therefore the following two procedures may not work for the registration you are trying to complete. You should first try the prefixes 21, 22, 23, 24 (one at a time) in front of your serial number, these are regional prefixes which are applied to serial numbers for region specific products for software registrations. Alternatively you can replace the first 3 digits of your serial with the characters 808. This can help with warranty registration and the canon image gateway. Pixela Support - 00 800 1532 4865 (international toll free number) - 01489 564 764 (Uk number)