20 Most Recent JVC Everio GZ-MG360 HDD Camcorder - Page 3 Questions & Answers

hi i dont know

Hi,

This is a BAD and COMMON error on this model. You could try to format the hard drive and see,if that works. On most occasions, this error would not even allow you to format HDD.

Some thermistor must be damaged (or a PCB path). It's possible a visual check would show it only be a connector that got losses inside. Your data on the HDD might be lost. Usually portable equipment have a 0 gravity detector that park the magnetic heads when a fall is detected to protect the HDD platters, but it don't work every time.

If all look fine, the camera will have to be serviced by JVC.As it is under warranty, it would be repaired/replaced without any charge by JVC.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

I have the same problem.I called customer service and they want $33.01 plus $7.00 for shipping. :(

The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This is usually caused by a defective CCD image sensor and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Hello

My apologies if this message finds you long after posting this problem , but I am currently working through a backlog of problems that never got answered and hopefully this info can still be of use if not now possibly in future.

Please download Disc Digger HERE. This is a free tool you can use that works very well and there is no installation required, just run the program once you downloaded it.

Once you have connected the memory card to the computer via either the camera or preferably with a usb card reader , run the program.

On the program , select the dig deep option for accidentaly deleted files or dig deeper for a formatted card. Then select the card you want to do the recovery on and run the program.

The data will be displayed and you can recover it from there. This will only work if the card has not been used since the pictures were lost. Save the files to a location on the computer hard drive and not back to the memory card as this will overwrite the other pictures that still needs to be recovered.

Some of the properties of the files may become lost in the recovery but the pictures should be fine.

Feel free to ask if you need more assistance.

Kind Regards
Andrea

http://books.jvc.com/booklist.asp?Model=GZ-MG360bu

Hi

Did you get a power cable when you purchased the device? You should. Look for the connector port at the back and plug it to the outlet or power surge.

Hope this help

The Power switch assembly can be replaced on your camera fairly inexpensively. However, it's not a user serviceable problem and will need to usually be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on F

The LCD hinge unit will need to be replaced and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be diagnosed by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

that is probly from the dew sensor inside the mechanism housing you can try an air dryer at a medium heat range to not damage the plastic, and blow the hot air in the mechanism compartement until the condensation message shut dow
if not thats its the dew sensor it defective and as to be replaced

hope that will help
regards Allan

This is usually caused by a failed component in the power circuit within the camera and can be repaired fairly inexpensively. However, it’s not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I’m a professional repair technician with over 20 years in the business and have repaired many of these. I’m semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Download and install Windows Media Player Codec 3.9.6.

Download and install Media Player Codec Pack 3.9.6.

I have lost my JVC Everio GZ-MG630RAA manual could you please email me this manual thanks Geoff

it should be the top asked questions by people who owns jvc everio mod, panasonic and canon mod file, the mod file can't be played or edited, you can use iOrgsoft mod converter to convert mod to avi, simple yet powerful

http://www.iorgsoft.com/Mod-Converter/

Faulty display is the first thing that comes to mind. Are you able to play previously recorded videos on it? It sounds like the LCD panel is fried but I want to confirm.