Siemens optiPoint 500 Standard Corded Phone - Answered Questions & Fixed issues
Change internal directory on optipoint 500
The extension name and extension number are set in the system programming. Use manager 'e' and change them in the station view. If you are swapping people around and want them to keep their extension numbers and names, you should re-patch the cables feeding to the wall sockets rather than change the programming (if you can).
11/26/2014 10:08:24 AM •
Siemens...
•
Answered
on Nov 26, 2014
•
1,464 views
Programmed speed dial - internal calls
To add an Extension Key: -
DONT lift handpiece, enter [*91] then press a vacant memory key and then choose “Repdial Key” from the menu. Enter an extension or group number and press the [ü] key.
To dial an Extension Key: -
Lift handpiece.
Press the memory key you programmed.
Storing a personal speed dial number: -
Lift handpiece.
Dial [*92]
Dial memory number.
(*0 - *9 for personal numbers)
Press the [ü] key.
Dial 0 then the number to be stored.
Press the [ü] key.
Hang up.
How to dial speed dial numbers: -
Lift handpiece.
Dial [*7]
Dial memory number.
(*0 - *9 for personal numbers)
(001-999 for system numbers)
For Example: [*7*0 ü] will call the personal number stored under position *0.
[*7001 ü] will call the system speed dial number stored under position 001.
8/24/2012 9:29:29 AM •
Siemens...
•
Answered
on Aug 24, 2012
•
955 views
My all extensions ring bell
Possible fault in the tone ringer IC. This is normally triggered by the incoming signal before the line is switched on. So the IC takes the pulse straight from the incoming voltage , normally from the line in rectifier.
So use a meter to see with a test call for the pulsating voltage on the IC, if present then the IC is faulty. If absent check the inline signal being absent to this section.
1/30/2014 12:29:58 PM •
Siemens...
•
Answered
on Jan 30, 2014
•
281 views
Features keys
To add an Extension Key, enter [*91] and choose “Repdial Key” from the menu. Enter an extension or group number and press the [ü] key.
11/17/2009 9:14:57 PM •
Siemens...
•
Answered
on Nov 17, 2009
•
731 views
Can Siemens optiPoint 500 phone be used at home
An "Optipoint 500" phone can not be used at home!
It is a digital phone, specifically designed for Siemens digital phone systems. Do not plug it in at home. That could damage the phone or may knock your phone line off.
However you can use a "Optipoint 500 IP" phone at home for voice over IP calls. But this would be connected into your broadband router and would connect via the web to your companys Siemens phone system.
8/4/2009 9:34:36 PM •
Siemens...
•
Answered
on Aug 04, 2009
•
726 views
Not finding what you are looking for?