20 Most Recent HP Officejet H470 InkJet Printer - Page 5 Questions & Answers

Hi ,

Just want to let you no that this printer is not built with scanning feature so you will not be able to scan .

thanks

There is nothing to reset, usually, you just pop in the new cartridge and it works!

Using Windows?

On the bottom right of your screen, you should see a printer icon. Double click on the icon and open the print queue.

Select the job you want to stop and delete it from the print queue.

Don

Please follow all steps here:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01182176&cc=us&lc=en&dlc=en&product=3434455

check the power cable try a different power socket, check if there is any lights coming on, in power adapter could be the power adapers fuaky is s must replace

Hi there,
I did manage to solve the problem in the end.  As it seemed to be a communication problem, I restarted my Mac (as opposed to switching off the printer and on again) and it worked!!
Might need you some time in the future though....
Thanks, S Walsh

You can get installation drivers from HP's support website here: http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=3434453

Select your specific model and then choose your OS.

I can help, I had the same problem. So first you must reset the printer and set a network. The little button on the back that is 1,2,3. Just pick one and leave it there forever. Next you must uninstall the printer from your computer since you need to just start all over. Place the install disc for the printer and choose the uninstall option and follow those instructions. Next you need to reset the printer of all network activity. You do this by holding down the power button and pressing the X button twice then pressing the down arrow button six times. This resets your printers wireless setting to factory fresh. One you do all this reinstall the printer with the install disc. But first make sure the printer is on and connected to the laptop with a USB cable and also connect to your laptop wireless as well and make sure the printer is on and the wireless card installed on the printer. It will not print but it will have a connection to your laptop at this point. When you see the options on the printer install, choose the option install a wireless device and not the bluetooth. It will the go through some things and when it finally says that it cannot find your printer choose next and find your network. If it is not listed on your choices manually put it in. Your SSID is hpsetup. This will then let our laptop find your printer and follow all of the instructions to finish the printer install and then the wireless card installation. Hope this helps. Just make sure everything is hooked up and connected USB and wirelessly before starting the install. This is the deal breaker. If not, it will not work.

Generally you can change margin settings when you go to print your document.
HOpe this helps.

do you know about the lights flashing and error saying cartridge stalled

If there is NO PAPER JAM then that message really means that your printers PC board has packed up. TOO expensive to fix. NEW one is the answer

Well the basic driver package is well over 100Mb, so I can't email it to you. Download it on another PC, and burn it to a flash drive or CD. get it here:

http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&lang=en&product=3434455

* Please rate me *

After replacing the ink cartridge, the HP Printer light blinking that means your printer has some another technical issue. The HP printer blinking different type of lights. Let's discuss the reasons behind the HP printer lights blinking issue: When your HP Printer blinking orange light that means the problem with your printer ink cartridge, toner or may be corrupted configuration settings. If your HP Printer blinking Blue Light, it indicated the HP Printer isn't setup on the wireless network. Find the right solutions here and fix the HP Printer lights blinking issue.