20 Most Recent HP Officejet H470 InkJet Printer - Page 2 Questions & Answers

I think your image size is too large. when you command your printer to print the image. choose the paper size on which you want to print it.operating system will automatically set the image size to the paper size

Hello my friend.First you must install the software if you haven't.Insert the Starter CD that was with your printer into the CD drive,the menu runs automatically,if its not double-click the Setup icon on the
Starter CD.On the menu, click the button for the connection method you want to use(wireless).Follow the onscreen instructions to complete the software installation.
After that we are going to create a wireless profile.
Open the configuration utility for your computer’s wireless network card, then do
the following:
Create a new wireless profile with the following values:
• Communication mode: ad hoc
• Network name (SSID): hpsetup
• Security (encryption): disabled
Activate the profile.
Wait two minutes for the device to obtain an IP address, then print a wireless
configuration page.
On the configuration page, verify the following for the device’s network settings:
• Communication mode: ad hoc
• Network name (SSID): hpsetup
• The IP address is not 0.0.0.0

the filter is not running the ink and that means that the service station might be faulty, get a technician to have a look at the unit

get a technician to service the printer the service station might be faulty

No, it can be because of dust or might be need some oil as well. it can be fixed, just clean the printer.

Hi, i have here some possible solutions that might be of help to you. Please click on this link:
https://h10025.www1.hp.com/ewfrf/wc/document?docname=c01554876&tmp_task=solveCategory&lc=en&dlc=en&cc=au&product=3434455
i hope this helps.

I would suggest the app Print Bureaits kind of expensive($20)works with i think all printers i thinki have not had any problems so far

Hello. It is very unusual that you dont have this tab (top right corner of printing preferences)
This could indicate that you are using a generic driver and not the latest from HP. You can download this driver from there web site and the services tab should appear. This is the only way to check the levels.
Regards GM

Open the tap of the printer, they should move.