20 Most Recent Sony Ericsson K530i Cellular Phone - Page 8 Questions & Answers

Hi,
User guide guide for k530i
http://www.sonyericsson.com/cws/support/phones/detailed/userguide/k530i?cc=gb&lc=en
Thank You

You can navigate to my solution here, on your another posting.
Concerned, Nooh

Here is a link to the guide for opening and repair

If you want to format your Memory Stick Duo memory card while it is inserted in the Sony Ericsson phone, you may get an "Memory or Application In Use" error.

The correct way to format the memory card is to first change the USB port mode on the phone to File Transfer mode while it is disconnected from the Windows PC. Then connect the phone to Windows PC. It will be visible as a Disk Drive in Windows Explorer. Right Click and format it.

w w w.superunlockcodes.com/

contact the provider

Sony Ericsson k530 headphone Problem

The problem can be solved by updating the firmware. you can update by using the information in link
http://www.akshayy.com/sonyericsson/others/operation-failed-issue/
or get done from the service centre.

hi :) here i teach u how to solve your pro,if u check the phone charging port was dirty,u can use a tooth brush and some alcohol. brush the charging port.try it. normally sony have this kind of pro.
please voted me if my solution useful,thank..

k530i doesnt have WiFi

Hi , This is a software problem . . This happens when the application u have installed is not supported by ur mobile . if it is an inbuilt application u should reset ur factory setting . .i will give u the steps if needed .

Inorder tosolve your PUK problem, *kindly contact your service provider (customer care) *Tell your phone number and they will give your PUK code *Enter that code on your cell phone(Wall that ask puk code) *Then your phone ask another pin code&to verify,there you can type your desired code(say 0000,00000,1234,12345). * Then your phone will restart normally.... "IF YOU THINK MY SOLUTION IS HELP FULL TO YOU,THEN DON'T FORGET TO RATE ME"....THANK'S

Inorder tosolve your PUK problem, *kindly contact your service provider (customer care) *Tell your phone number and they will give your PUK code *Enter that code on your cell phone(that ask puk code) *Then your phone ask another pin code&to verify,there you can type your desired code(say 0000,00000,1234,12345). * Then your phone will restart normally.... "IF YOU THING MY SOLUTION IS HELP FULL TO YOU,THEN DON'T FORGET TO RATE ME"....THANK'S

dead on 220

You can generally get a free unlock code for your mobile handset by calling up your cell phone carrier and requesting one. In exchange they will need you phone's IMEI number which you can get by typing *#06# on your dial pad. If you cannot get a free unlock code, I would suggest looking at http://hyfeno.com to see if they have matching unlock instructions. I hope this helps you and good luck!

PLZ SAY IN ENGLISH LANGUGE BRO.....

Have you tried 000000 as code for it, please try inputting that code, could be lock on boot option is just turned on after the repair, and if its just got back from repair,and you received it with a lock, there is always an option to have it brought back to the repair shop for code removal.