20 Most Recent Casio CTK810 61 Key Keyboard - Page 5 Questions & Answers

Is it connected to any external devices?

Casio generally speakeing work the opposit way around to Yamaha and most other power supplies. - to centre pin + to outer Check voltage on keyboard or in the manual to be 100% sure

Hello, I have the same problem, did you find a solution ? Regards.

The service manual exlains how to get to all panels for repair.

It is a known issue on this model. https://www.google.com/search?q=%22casio+privia+px-100%22+pedal+not+working Reset....but https://www.fixya.com/support/t21517149-reset_privia_px_110_back_factory_setting https://www.google.com/search?q=%22casio+privia+px-100%22+reset ..

I got my manual online. Google search

I was hoping there might be a Service Manual, but there isn't. Try Casio direct. https://www.google.com/search?q=casio+ctk+900+service+manual Lots of Owner's Manuals ..

This link might help. https://www.google.com/search?q=Casio+Privia+px-100%2C+loud+key ..

Troubleshooting on a similar model here, but unless you are an electronics engineer, you will need a Casio Service Centre https://www.ifixit.com/Wiki/CASIO_CDP-230R_Troubleshooting https://www.google.com/search?q=Casio+COP-100+Digital+piano+no+sound ..

Turning it on and off and on again initializes the keyboard settings. Page EN10 in the manual make that clear. The manual also has a troubleshooting section in the back. https://support.casio.com/en/manual/manualfile.php?cid=008001061 https://ourpastimes.com/how-to-troubleshoot-a-casio-piano-keyboard-12352821.html

Use this procedure to return all keyboard settings to what they were when you purchased it. Note that this procedure clears all data from memory. • While holding down the ENTER button, turn on keyboard power. • Reset? • Press YES to initialize the keyboard or NO to turn on power without changing any settings. https://archive.org/stream/Casio_CTK-811EX_Service_Manual/Casio_CTK-811EX_Service_Manual_djvu.txt

Yes, the right category and 'make model (what it is)' really helps on this website :>D

Playing With Different Tones; Selecting And Playing A Tone ...

https://www.manualslib.com > ... > User manual

Casio PRIVIA PX-130 Manual Online: playing with different tones, ... The Names Of The Tones Are Marked Above The Keyboard Keys To Which They Are Assigned.

CTK-573 is the closest. https://www.manualslib.com/manual/268824/Casio-Ctk-573.html?page=10#manual or Contact Casio Support as they skim past your model. https://world.casio.com/manual/emi/ There is a 4 minute video here, as well as sales info https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk01dcFCTEp0bmZKf-_Hkm-coJ2n4zw%3A1611763599264&ei=j48RYPbRD8iEwbkPy_K0sAk&q=casio+ctk+574+61 ..

You manual is here http://support.casio.com/storage/en/manual/pdf/EN/008/Web_CTK2400-ES-1A_EN.pdf Interestingly...check out page EN-34...about the section on local control...Follow the directions to turn your sound back up... Good luck

Link to free manual: https://www.manualscenter.com/manuals/casio/ct625-owner-manual.html#.XufFjEVKjic

https://www.youtube.com/watch?v=WWqQoZxunQQ

Go there: https://images.search.yahoo.com/search/images;_ylt=A0geK.eJcQ9eRi4AUktXNyoA;_ylu=X3oDMTEya3VydDhnBGNvbG8DYmYxBHBvcwMxBHZ0aWQDQTA2MjBfMQRzZWMDc2M-?p=casio+px-700+piano+pedal+wiring+instructions+manual&fr=tightropetb

Take a look at.... http://music.manualsonline.com/manuals/mfg/casio/ct636_1.html?p=1 and see if it answers your query. Good Luck !

If you have the part, you need a soldering iron, solder wick and solder. Apply heat with the iron to the lugs on the input that protrude through the circuit board, and apply solder wick to desolder the bad part - do this for all the contacts. Remove the bad connector, place the new one and heat the lugs one at a time, once the iron has been on the lug for several seconds, apply the solder to the lug and hold for a second or two. When the solder melts and flows remove the iron and the solder. Allow it to cool - repeat for all the lugs. A good solder joint is shiny. A bad one is dull, and that is called a cold solder joint. If you get a bad one, just heat it back up and wick the solder away and start over.

My guess would be they have been pulled up out of the normal position. Do they still press down and sound? if you remove the keybed and the contact strip you can then reposition them. The worry is that when they are forced up they sometimes crack the circuit board underneath. the keys have a hook type arrangement that should stop the, lifting up. maybe open and report back with some photos of what you find and more advice might be available. Dan Becketts Music Ltd