20 Most Recent Boss Micro BR Digital Recorder - Page 2 Questions & Answers

Make sure that the SD slot is not dirty, check inside with a light and you may want to blow it out.

My Yamaha electone organ el25 no sound but all lights on

Check if you may have knocked off the speaker leads OR ones to an expression pedal.

I know how to set it back to factory boss micro br.

I had the same issue, and ended up solving it after trying many different things. So first you put the card in your reader, right click, and hit "format...". It should ask you if it's ok to erase everything. Say yes.

Then put the card in the recorder, and it should say "Unformatted". Hit Utility and TR4 to Initialize. That should do the trick. Hope that helps!

Troubleshoot. Try different cables, mics, instruments, etc to make sure that its the device and not something else.
Make sure you don't have any digital effects (compressors, guitar effect simulators, etc) activited.
See if there's a way to restore the device back to factory settings. Make sure you backup your recordings first.

No the truss rod is usually in more than that. Take it to a reliable Musice Store and they shold be able to adjust it for you.

Don't know if this unit is sensitive to the type of CD, but my Phillips recorders will ONLY burn the "Music CD's" (harder to find, more expensive). Read up on the difference of regular vs Music CD's. ALSO some recorders will not burn disks rated at lower or higher rates.

Refer to your BR manual for procedure to format the card. Formatting the card in a PC just doesn't cut it.

Look in your index in the manual for "formatting" or "card"...etc.

turn off the power and press utility it will ask FACTRY RESET? press TR4 uit will then ask SURE you press TR4 again to complete