20 Most Recent Xerox Phaser 6125 Laser Printer - Page 2 Questions & Answers

You can build your own resetter device, very simple and cheap,no need electronic knowledge here is the link:http://www.tradebit.com/filedetail.php/178510406-at88sc0204-reset-software-full-package

try to clean the laserwindows of the printer.

you cal also try to clean the laserwindow of the Magenta imaging unit

Try this:Go to Ports in your driver propertiesGo to configure portChange your protocol from LPR to RAWand check if port is PORT 9100

An internal error has occurred. Turn the printer off and on. If the problem is still there the laser needs to be replaced. If the machine is less than a year old then the machine will be fixed under warranty.

The printer IP address is something you have to add. You can go to Xerox.com and go to support, type in your model number and then to support again.
Then enter IP in the search box and it will tell you step by step how to set it up.
You can set the printer up with a USB cable and it will skip that all together.
The reason it is asking you for the IP address is so it can find the printer and automatically add it.
If you need help. e-mail me at [email protected] I will try and help you that way.