20 Most Recent
Pyramid XPA480 Car Audio Amplifier - Page 4 Questions & Answers
What is considerd,a chassis ground ?
chissis ground is just simply the car body metal, not metal that moves like car seat. drill a hole smaller than your screw and the drive the screw into it with a lug connected to your wiring
Hook up pyramid subwoofer
if you are hooking up to a stereo reciever make sure the ohms & wattage are correct or it could cause problems if you are hooking up to a car head unit i dont advise it could damage both headunit and sub
Car stereo
Pyramid makes all kinds of audio amplifiers for your car.
I have a pyramid amp
- 4-Channel
- 350W X 2 Max @ 4ohm
- 700W X 1 Bridged @ 4ohm
- Dim: 2.4"H X 10.7"W X 6.9"L
- Mosfet Pwm Power Supply
How do i install a
run rca cables and a remote wire from your radio to the amp,run a power wire from your battery and attatch a ground to the car ,then hook up the wires and cables to there respective places.
Help with code radio for my nissan pp2787h
The radio code is a security feature that's meant to deter theft, and it's unique to each vehicle. If you've lost your code, you'll need to contact a Nissan dealership or service center and provide proof of ownership. They should be able to help you retrieve the code. Please do not attempt to use codes from the internet as incorrect attempts may lock your radio.
Is there bluetooth on nsdn-w59
I have the same radio now with no Bluetooth am trying to get Bluetooth on it too without having to buy another radio. Please help.
No sound from wireless headphones in a toyota sienna
First thing to do is check to make sure that the batteries are properly charged.
Second, make sure that you have a clear line-of-site to the IR transmitter. Infrared (IR) works the same way that your TVs remote control works - if the signal is blocked, then you will not hear any sound.
Third, make sure that you are in the rear seat of the vehicle when listening to the sound. The IR transmitter only transmits to the rear seat, so you will not hear any sound if you are sitting in the front seats. This is a common problem that i see.
Lastly, make sure that the heapdhones you purchased are compatible with your 2006 2007 2008 2009 or 2010 Toyota Sienna. Remember that some older models require RF headphones, not IR headphones. I checked http://www.audiovideo2go.com for compatibility before I purchased my headphones. They have a useful listing of all the headphones and models of vehicles they are compatible with.
Not finding what you are looking for?