20 Most Recent
Panasonic Viera TH-42PZ80U Plasma TV - Page 7 Questions & Answers
Tv keeps going into standby mode
There are many reason for a Plasma display to go into standby mode. It is difficult to describe all here by this window. If you wish to get more details, check this link. It has details about the faults that can occur to a plasma display.
http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the
brand name and model number to of your set, to its search box, and
press '
Enter' or view it in
Mosaic / Timeslide
option.
How do you use the video out? I can get the sound
Always check the input on your tv. Depending on where you have placed your composites would determine what input your tv is set at. If I could be of further assistance, please provide tv model and what device you are using to connect to
Flashing standby light
Flashing red light can sometimes be fixed by holding down the power button on TV until it stops flashing then turn it off then on again. Disconnect everything except power cord before trying this. Mine was fixed this way and saved $500+ repair. Still going over 6 months on. Worth trying.
Screw hole size back
To know more about this, you must have to download the repair manual to this set. If you wish some details, check the site linked here. It has disassembly procedure to many brand TVs. Check it. Pull
up previous posts or type in the
brand name and model number to of your set,
to its search box, and press '
Enter'.
http://electronicshelponline.blogspot.com/
10 red lights
Sound processor is in trouble. If you wish to know more about the blinking codes, check this link. It has details about the blinking codes to many brand TVs. Pull up older posts, either by its left side bar, or, see it in 'Timeslide' option.
http://electronicshelponline.blogspot.com/
Device got wet
If the TV was off then leave it off and let it set for several days until you are sure that the whole thing is dry, and possibly even remove the back panel so air can get to the boards then try plugging it in again. If it was on it may be completely fried and you should replace the TV.
Zoom
Check the HDMI settings.
Panasonic Viera keeps going into picture refresh
The tv is on "store" rather than "home" setting. If the message "going to refresh mode" keeps appearing every 5-10 minutes, do the following:
-Unplug TV from wall and leave it for about a minute.
-Plug TV back in and follow "initial setup instructions" (can be found on page 14 of manual).
You will be given the choice of "home" or "store" settings. Change it from "store" to "home".
-Done.
Not finding what you are looking for?