20 Most Recent Panasonic Viera TH-42PZ80U Plasma TV - Page 6 Questions & Answers

my TV has a half black & half white screen & half of the TV is showing the picture including the normal sound,what can I Do,?

HI Ana, Please check the input connections properly, change the input cord. If it does not help, you need to consult the service center or some qualified technician. Good luck.

i own 65" viera that about 6 years old , has 3" wide black stripe running down the right side about a 1/3 of the way in . it stops at the half way point , Anyone know if its fixable ?????? thanks Andy

hi this could be power supply fault i'e capacitors that might be bulged or dry joints, it would need to be tested by a tech hope it helps regards shaun

hi try retrevo site

These blinks are fault indication, and known as blinking codes.From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV.This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/.If the blinks continues, and non-stop, the fault should be with its main system control IC, and with the memory IC. Try this link too. http://electro-medical.blogspot.com/

To do a factory reset, you have to enter its service mode option. For more information go to http://electronicshelponline.blogspot.com/ Service mode entry, adjust & exit procedure to many popular brand TVs, including many models of Panasonic brand are given. Pull up older posts.

Will not buy anymore panasonic t.v.'s again

Panasonic is junk!!! Will not spend the money to buy another Panasonic again!!!

check sc board look for short circuit in the mosfet

10 blinks check sc board for a short circuit in the mosfet ,replaces SC board

Hi there,In your PS3 configuration you'll likely have to set the PS3 so that it is using the multi-AV rather than HDMI.(In Video Output Settings) Also on the TV input you'll have to select composite in rather than HDMI.https://support.us.playstation.com/app/answers/detail/a_id/788http://manuals.playstation.net/document/en/ps3/current/settings/videooutput.htmlHope this helps,Jeff

HDMI is goofy. Connect everything while it is off and then power everything up. That should take care of it after the first time you do it.

If you're sound in electronics, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.