Yamaha RX-V363 Receiver - Answered Questions & Fixed issues
HELLO MY NAME IS ROBERT.
The TV may have HDMI ports, but the V363 may only have RCA outputs.
Video Audio HDMI Male to 3 RCA AV Cable Adapter Audio Video Component DV Convert HDMI to 3-RCA TV Adaptor Line For HDTV 1080P AU
https://www.aliexpress.com
Try here.
My comcast remote won't turn
It controls the volume just fine. It's the power that doesn't work. I'm having the same problem with my Yamaha receiver. Different model. Multiple Comcast remotes too.
Yamaha RX-663 Powers down
It sounds like it's going into safe mode try testing the resistors just after the power supply you will probably find one or two at fault
Rx-v363 powers on then immediately off
The Yamaha receiver is going into shutdown because one or two channels have shorted audio output semiconductors, first check all speaker wires for shorts, if okay! all parts that are effected will need to be replaced.
When I set my Yamaha
The receiver automatically pick the best configuration for the source audio. Most music is 2 channels being up-sampled to 4 channels. (Sub-out is separate.)
Hi. I write from spain. I have the blu-ray LG
Have you tried the another optical cable? They don't tolerate dirty connections or small-radius bends in their routing. THAT (and the expense of optical cables) is why I always choose coaxial connections when possible.
I have a Yamaha Rx-V363
The unit probably experienced a power supply failure, and will have to be troubleshot. You should contact Yamaha to find an authorized repair facility near you. Here's their support site:
http://usa.yamaha.com/support/
You also contact a local repair shop. Make sure you get an estimate first, since repair can be costly.
Good luck, and hope this helps.
Dear Sirs, I have a
Page 48 under Set Menu:
Initial volume INI.VOL.
Use this feature to set the volume level when the power of this unit is turned on.
Choices: Off, -80 dB to +16 dB
Control step: 1 dB
Not finding what you are looking for?