20 Most Recent Honeywell TH4210D1005 Heater - Page 4 Questions & Answers

It must be wired or it will not work. Take a look at the installation instructions before you attempt any reconfiguration!

Model #RTH6360D1002 Model #RTH7560E1001/E check for these at HD or lowes, you will t stat with aux or emergency heat.

Wouldn’t mount directly above heat pump due to graft from unit, outside anywhere is fine, directly behind unit likely best location.

That will should work, mark leads and wires be fore removing to ensure correct orientation.

Yes. Turn power off, take picture and match terminals

1800 honeywell

You have too many ones (1) in the model number. Honeywell Home RTH111B Check out the installation videos in the link. https://www.google.com/search?q=Honeywell+Home+RTH111B ..

a one zone home, ????? is it a home or RV? or? no model Honeywell told. so yeah hard . no HVAC system told we can not guess what the stat is connected to ever. my stat has batteries, for power loss, (my Huge generator is backup) but I modified mine to run on batteries or 24vac too. it is and option on my system and the extra wire was there for me. so works for COLD AIR demand not said but kinda Implied? what I do is always have a spare thermostat (in my KIT) that way if one fails , the water pipes in the house do not rupture at 0C. (my neighbor just did and $75,000 damage feb2021.) ouch. my wild guess is the heater on other end is off line, breakers tripped. door left open (hatcH) or hot ignitor dead is it Gas fired NG or what? blower dead inductor blower dead. and more can do lost more , even loose wires. or the 24vac transformer popped dead.

Hi, It's possible as I'm seeing these products listed on several pages together. However, I would check with a local hvac representative before going through with the replacements for safety. Thank you.

it is normal refer to page 10 in your instructions/manual or go on line and google honeywell hz311 manual

Go to honeywell.com
Under red welcome sign
Bottom red highlighted box literature/image search
Type in thermostat model number
Click on arrow to right
Then click on the PDF files owners manual / installation instructions
If you can’t find what you want, the bottom left and bottom of web
Page, they have homeowners assistance and Home products to get the help you need.

Yes it will work.

Go to zone 3 and see if any air blowing out. Likely have a stuck damper. If you can access the dampers tap on the duct or motor a few times, maybe free it up.

Click on the literature tab. https://customer.honeywell.com/en-US/pages/product.aspx?cat=HonECC+Catalog&pid=TH6220D1028/U

https://www.youtube.com/watch?v=-DQ3woD0Ehg

There is a Honeywell model RTH2300B1012, which is what I think you're talking about.The Honeywell website has the owners manual for that model available online at:http://customer.honeywell.com/Honeywell/getliterature.axd?LiteratureID=69-2448ES.pdf

To replace it, you'll need to know whether it's a Robertshaw or Maxitrol Valve. As well as the Model number of the valve and whether it's Natural Gas or Propane Gas. Unless, you're really experienced with working on gas appliances, I would not recommend this as a DIY project.

Hope this helps solve your problem.

so replace it

There are a couple of things to check. There is a water pump in the unit that draws the water and pushes it through a tube into the pad area. The tubes can get plugged or the motor on the pump can fail.