20 Most Recent
Tomtom ONE 130 GPS Receiver - Page 4 Questions & Answers
Only had unit for two days and it froze up, what
Hi. Try the following -
Go onto
www.tomtom.com there is advise regarding reseting your device.
They advise-
Remove any data card
Press a straightened paper clip into the reset button (15 seconds) If you cant find it, the website will direct you via the device online handbook.
Replace the data card
Press and hold Power On for 5 seconds.
Good luck!
Tomtom formet
Hello,
Could you be a little more spesific with your problem? How can we help? Also please include the brand and model.
My tomtom receiver is frozen on the start screen.
Connect your TomTom to the USB cable then turn on your TomTom in that order. Go to "My Computer" and open the drive that is your TomTom. Copy and paste your map folder to the desktop. Delete everything on your TomTom (don't format). After deleting everything on your TomTom. Open TomTom Home. TomTom Home will tell you, you need an application for your TomTom. Let TomTom Home load the application. You will probably have to do this at least 2 times to get the latest application for your device. After TomTom Home has loaded the latest application for your device closer TomTom Home and copy and paste your map back onto your TomTom. You should be ready to go after doing this. Make sure you do not skip a step when doing this.
Wrong address?
More than likely your house number is not in the data base. I have the same problem. What I have done is when you want to setup your tt home address go where you get full bars and are ready to navigate. Go to set home address and tap current location as your home address.
Hope this helps.
No GPS Signal for TomTom 130
Hi,
If you can, go outside to open space, no building or trees.
grab the tomtom and hold the power switch down regardless if it turned on or off, it will play drums wait 5-25 mins (make sure you are not walking around) , you will pick up a signal.
try this it works on most units.
Thanks,
Pabs
Trying to install HOME automatically and wait flashing on screen
If you insert the CD that came with your device, it'll automatically connect you to TomTom Home. Once you connect your device via USB your computer will recognize it after the the software has been installed and automatically connect you. You don't necessarily need to restart your computer after installation, but I recommend it
Volumn setting on TomTom 130-S
There were a handful of defective units experiencing this issue. If you contact customer support at 1 866 486 6866, they'll replace the unit for you.
Some roads missing from the map
you want to ensure that you have the latest map available for your unit for this model it would be version 8.15 but do keep in mind before purchasing that this may not solve your problem as the maps may not be updated yet to reflect the changes in your city it may take 2-3 map revisions before you see the most accurate data for your location
Not finding what you are looking for?