20 Most Recent Epiphone Les Paul 100 Electric Guitar - Page 9 Questions & Answers

Try here:http://www.google.com/imgres?imgurl=http://www.electric-guitar-info.com/images/Epi-wiring-circuit1.jpg&imgrefurl=http://www.electric-guitar-info.com/les-paul-wiring.html&h=348&w=503&sz=48&tbnid=aSO6CWOP8JpBPM:&tbnh=90&tbnw=130&prev=/images%3Fq%3DEpiphone%2BLes%2BPaul%2BSpecial%2Bwiring%2Bdiagram&usg=__tWQm6BV6hWlRkesXsvExeuCGPcI=&sa=X&ei=emZjTP3YCsH38AaV7q2vCQ&ved=0CBgQ9QEwAQ or here:http://www.guitarpartsshop.co.uk/acatalog/electric-and-bass-guitar-circuit-diagrams.html

You will have to repost and tell us what piece of musical equipment you are using as your question that is posted doesn't mention this. It also helps sometimes to state the brand (manufacturer) and model number.

There may be an internal fuse, but the unit will need to be serviced by an electronics shop.

If no odor or burning smell happened, then I suspect a bad solder joint or cracked circuit board. Look the board over with a very bright light.

LOOK for a dark circle around pins of HEAVEY components in the solder menicus for all the pins of the heavy components.

Look for board cracks with a small LED flashlight shined through the board.

Hello,

Having sold guitars for many years, I can tell you that Epiphone uses a standard "care and maintenance" manual for the majority of their guitars, placing them with types rather than models of their guitars. I don't sell guitars anymore, but recently purchased an Ibanez Artist, and they do the very same thing. The manual I received with this $1,200.00 guitar has on the front "Instruction Manual for Electric guitars" and is not model-specific. If you would like, I can assist you with any aspect of your guitars care and maintenance. You can receive a generalised manual directly from Epiphone for about $12.00 (but sometimes free if you've purchased recently and one was not included) or you additionally may find one on eBay or similar sites.

Thanks for using FixYa.

We can only guess that this is a guitar:

Use this site to find similar configuration:

http://www.guitarelectronics.com/category/wiringresources/

Hi there,

Well you can purchase the cover from the below link -

http://www.tradingmusician.com/catalog/index.cfm?fuseaction=catalog&parent_id=377

Good Luck!!

Thanks

Start by getting the tubes checked.

1. Clean the two parts with BRASSO.
2. Lubricate the two surfaces with cork grease.
3. Don't carry instrument by the neck.
4. You may need to take the instrument in to a music shop and have the neck "brazed" (like welding or soldering).

I certainly can not tell you how....but I know someone who can. Contact here for all your restoration questions and help!

[email protected]
If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

This site will havee what you need:

http://www.guitarelectronics.com/category/wiringresources/

You will have to pickout the diagram that most closely matches your particular arrangement.

Hope this helps:

The most likely case is that one of the main output transistors (if which there are many) is shorted. When the protect circuit senses DC on the final output, it will not allow the output relay to come on to protect the speakers from raw DC. With the power removed, you can check between each outputs Emitter and Collector and you will probably find close to zero ohms. From that point you need to unsolder each of the pins of the bad channel until you find the shorted device(s) and replace them.

'pianoforte'

BREV. N. 838420