20 Most Recent Panasonic CQ-VX100U Car DVD Player - Page 2 Questions & Answers

hay tres codigo que te podria servir en caso de que el due?o original no lo alla cambiado estos son: 1234,0000,9999. espero y te sean de utilidad...

i need the id code

Hello.
You must connect SIDE BRAKE(Bright Green) leed
to ground.

contact customer support, theyll ask you a bunch of questions and walk you thru the process, and a lot of the newer radios are set up if bought new to require registration thru manufacturer,in the case of theft

i am the second owner and do not have the code anymore? there must be an override code or something?

You will have to call panasonic with the serial # to clear the code securty

bought car yesterday they changed the battery and now there is a code display that has the unit locked up

sounds like a defective video driver IC (integrated circuit) or the soldered connections to it.

Definitly can be due to extreme cold weather. That's why I leave mine open! Try this, when the heat in the car gets warm inside, does it perform better?

Checked Panasonic's website for a remote, but part was not listed. You can call them at National Parts Center at 800-833-9626

Hope that helped you.

Larry T
Winona Lake, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

The wire should be located right on the parking brake itself under the dash on the left side of the kick panel.Its only a one wire and maybe up at the top of it.It will have a black like plug on the end of it and should be the only one next to it..Hope this helps you and have a great day I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589

I dont know if there is a way to reset it... Look up the manual for the CQVX100U on the internet, and see if there is a procedure... If not, contact Panasonic customer service 1-800-211-7262

http://service.us.panasonic.com/OPERMANPDF/CQVX100U.PDF
For the manual.
An authorized dealer is required by service agreement to install this wire to the parking brake which creates a ground when applied. The shadetree installer, however can hook to ground anywhere on the vehicle. I would recommend to put it on a hidden switch,as it is illegal to have a video in view of the driver.... and you can turn it off quickly if/when pulled over!

The rca plugs can short out. Or one of the comparator that is for audio selection. Might can get away with just replacing them

Hi Greg, I'd say you have a bad audio output IC, generally this will take out the fusable resistor that feeds the output stage, you should be able to find a part number on the IC, do a pin out and check between B+ and ground pins with it in circuit and see if you see a short. I don't know if you can find a service manual for it but hopefully you wouldn't need one

Question edited for clarity and typos. The first thing with CD Ejection issues is to try a CD Cleaning Disc. It has brushes to clean the laser optics. They always fail on the low power tracking laser. When it fails self test, it ejects. also First unplug power for at least an hour, then press and hold the power/on button while plugging back in, and keep holding for another 60 seconds . Here is the Service Manual https://www.manualslib.com/manual/683358/Panasonic-Sa-Ak87.html https://www.google.com/search?q=panasonic+sa-ak87+cd+keeps+ejecting+disc ....

I'm sorry, but wiring diagrams for specific car audio systems are not readily available to the public. These diagrams are usually confidential and used by authorized repair technicians only. If you need assistance with the wiring of your Panasonic CQ-C1100U car audio system, I would recommend reaching out to the manufacturer or an authorized repair service for support. They should be able to provide you with the information and guidance you need to properly install and wire your system. It's important to follow the manufacturer's instructions and any relevant safety guidelines to avoid damage to the system or potential harm to yourself or others.

It sounds like your SA AK 133 5 CD changer has some issues. The AM radio band not turning on could be due to a faulty antenna, a problem with the power supply, or a software issue. To resolve this issue, you should check the antenna first and make sure it is connected properly. If the antenna is connected properly and the issue persists, you may need to check the power supply or contact the manufacturer for assistance. The issue with the CD not ejecting could be due to a faulty drive motor or a faulty eject mechanism. To resolve this issue, you should check the drive motor and the eject mechanism and replace them if needed. The issue with the tapes not working could be due to a faulty cassette player mechanism. To resolve this issue, you should replace the cassette player mechanism.

This indicates that the CD player is ready to receive a signal from a Bluetooth device. To connect your device, you will need to enable the Bluetooth setting on your device and then select the "PANASONIC" device from the list of available Bluetooth devices. Once the connection is established, the source button should stop flashing and the audio from your device should play through the car audio system.

Hi, Check that the equalizer settings are what you want when you are playing audio using a BT connection. The user manual states that the settings are memorized for each source i.e. tuner, BT and CD, which I assume means that it can be set differently for each input type to suit what you want

Battery BLUE/YELLOW (+) RADIO HARNESS Accessory GRAY (+) RADIO HARNESS Ground BROWN (-) RADIO HARNESS Illumination GREEN (+) RADIO HARNESS Power Antenna BLACK/RED (+) RADIO HARNESS LF Speaker (+) PINK LF Speaker (-) VIOLET RF Speaker (+) LIGHT GREEN RF Speaker (-) BLUE LR Speaker (+) BLACK LR Speaker (-) YELLOW RR Speaker (+) RED RR Speaker (-) WHITE Amp Location BEHIND GLOVEBOX Steering Cntrls NO Speed Cntrl NO Radio Security YES https://www.google.com/search?q=panasonic+86140-0k120-g+wiring+diagram ..