Samsung HT-X810T Theater System - Page 9 - Answered Questions & Fixed issues

probably--- but fortunately you used paypal to do the purchase ring paypal direct and find out how to get your money back, and tell them what you have done to contact the seller and the lack of response from them I cannot see how a current would flow through a magnet as the fields of the magnet would affect the current flow any way it is part of the paypal policy to help you to recover from ripoff merchants

How do connect my wireless sound bar to my Samsung TV through SoundShare

watch the video How to Connect an HDTV to Your Sound System or Home Theater For Dummies If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

One or more of your speakers is probably shorted. Carefully check ALL your connections and make sure there is no stray or loose copper, then try again. If you get nowhere with this, then disconnect ALL speakers from the back of the system. If it still goes to Protection from there, the amp unit will have failed, and will require an engineer to fix. Good luck!

Hi Mary It sounds like, to me, your centre (center!) speaker has become disconnected. In a 5.1 (or more) setup, the majority of voices come through this center channel - and without it, you'll hardly hear any voices, other than those which are not the 'focus' and are to either side. Have a look on your remote controller for a 'Test Tone' button, which should cycle through all the speakers and play a noise - you'll probably find 'center' is quiet. If it is, check the wires - should be a simple repair! Good luck :)

check the connections on your center speaker. Most voice tracks are routed through the center channel

You probably have the sound settings wrong for either the device that is getting Netflix movie or the Samsung sound system. You might have even got both wrong!

But.... it is Samsung right?

Try This
Many CD Mechazizms used to have a small button just inside the left or right side. You push the button with a paper clip or bamboo skewer stick. ejects DVD.

All cd dcd players are sealed and hard to access. Because they have a laser beam insid that could shine in your eye and blind you. Safety First

look for a small hole in front of the cd tray Bend open a paperclip. If you look closely, you'll almost certainly see a small hole in the drive's front panel. If there are two holes, and one looks like it's intended for plugging in headphones, it's the other hole. insert the paperclip into the hole and apply gentle pressure. The drive should pop slightly open. Gently pull the drive out. If it doesn't open gently, the disc is probably dislodged. Carefully try to maneuver the disc so that it's sitting where it should. If that won't work, try to find a way to remove the disc without ruining either the disc or the drive. If you continually have to use the paperclip trick, you've got a bad drive. Consider replacing it.

I have a Logitech universal remote. They're great. You can origen them to control almost anything. Logitech makes many in different price ranges but don't go cheap. You'll be happy. You can even program them to do things like turn on the tv, then the cable box, then the surround sound all with one button. Love them.

Suggest connecting via the headphones jack or if available the RCA audio output jacks. If you connect via the headphone jack you will need to adjust the TV volume to a lower setting to avoid distortion/./ The The problem is that the optical output connection is a digital connection and depending on the digital format the Digital to Analog converter may not be a configuration that the audio stream to the stereo required for the tv/vcr in. How does the audio sound using the Samsung Smart TV internal speakers> Also under menus/audio/settings you may need to change the Optical output to stereo. Netflix also has settings that will change the audio stream. Hope This helps?

You either haven't got it connected right, or the output to it is too low. It might come under something like speaker settings on the menu.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

You may have a shorted speaker voice coil, the voice coil shorts above the volume setting you mentioned, try unplugging the speakers one at a time and see if the problem stops.

Your still going to need one even if you find a way! Try putting the model number of the Samsung into Google with the word remote after it. You might find a replacement is not too expensive.

Submit your original bill which shows your identity and the IMEI code to the police station( cyber cell) or the service provider along with a written complaint.
The fact that you are the owner is important to trace. Secondly only if the phone is expensive do you need to take trouble.

Maybe try headphones settings instead of internal speakers and consider the sound bar as headphones. Some TV's may limit output to headphones as well but start there. Assuming you have a Samsung TV, look at your TV settings. You may have the sound level on auto. Next check to see if you are set for the external speakers, you might have to look in additional settings to find this. Should you have another brand of TV the concept is the same. so check settings for TV for external output.

It means "protect". It's possible that a speaker cable is touching or shorted out somehow. Check all wires and speakers for faults. Then try again. If it doesn't correct itself, it might have an internal short in the main amp.

Look it up in user's manual. download from: ftp://ftp.panasonic.com/hometheater/om/sc-ht720_en_om.pdf

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.