20 Most Recent
General Electric WSXH208H Front Load Washer - Page 9 Questions & Answers
Are the barrings covered under warranty?
The warranty coverage for bearings or any other specific components depends on the manufacturer and the terms of the warranty provided. Warranties can vary between different products and brands. It's essential to check the warranty documentation that came with the product or contact the manufacturer or the place of purchase to get accurate information about the coverage.
Typically, warranties cover defects in materials or workmanship for a specified period from the date of purchase. However, normal wear and tear or damage caused by misuse may not be covered. Be sure to review the warranty terms and conditions to understand what is included and excluded from the coverage. If you have a specific product in mind, you can check the manufacturer's website or contact their customer support for detailed warranty information.
Hisense top loader WTCT802 8kg washing machine,
This could be down to a number of reasons. The most common of which is a displaced or faulty spin switch. This switch tell the machine that the lid is closed (or that the top is on a front loader). I know this may sound silly, but if you have a spin speed selector, double check to see that it's not been set to "0".
If neither of those work/fit the problem, and also if it is showing any error codes, eg. F01/F02/UNB, please let me know
My ELEKTA EAWM 1100 has E3, all the line and the drain motor are ok, what is its problem, please help
According to my search results, the E3 error code on your machine indicates a problem with the drainage system. Since you mentioned that the line and the drain motor are okay, there might be a blockage in the drain hose or the pump filter. You can try to remove the drain hose and check if it is clear. If it is not, you can try to clear the blockage by blowing air through it. If the drain hose is clear, the problem might be with the washing machine pump. In this case, you might need to contact a professional technician to fix the issue
Nikai 6 Kg washing machine head spinning but sticking.
Put a gallon of nearly boiling water in it for 30 minutes and then do a wash with nothing in it. That should dissolve the washing powder debris. Then stop using powder and switch to HE liquid detergent.
If that doesn't fully fix it, try a proper descaling solution like CLR or Lime Away.
Tecno washing machine error code e3
E3 means you have an error with your motor itself.
That means that it doesn't detect that your drum is moving smoothly.
Unlock the door, and spin the drum by hand to see if it spins normally. If it does, you either have a bad control board or a bad motor.
Not finding what you are looking for?