20 Most Recent Jack Lalanne Health Master 100 8-Speed Blender - Page 9 Questions & Answers

call the manufacturer spares to see if any are available

Sorry we do not sell parts nor have any parts locator service here.

If you are certain the outlet on the wall is "hot", then the problem will be in the plug, the cord, the switch, or the motor. An appliance person can tell you what the problem is, or, if you choose to fix it yourself, you will need to take it all apart and test it with an electric meter. Know that you may not be able to find a place that will sell you any parts, they may not be available. God bless your efforts.

Try holding the base then twist top part.

hi john. this is all i could find.go tot his link and see if it helps you out. How do remove the blender from automate chopper model ch 1 Google Search

You can go to your local hardware store or car auto parts, get some rubber gasket or from an inner tube, and you can make it.

do an online search using make and model or a small appliance repair shop in your area

Hi christine, go to this link it might help out .. replacement chopper bowl lid for Braun mr 6550 hand blender Google Search .. or you could try ebay..

try this link. blender solution 4000 parts Google Search .. or you could try ebay.

you should have got a manual with it.does it not show you what it is? but if its new i would take it back.

you could try ebay. or get in touch with the makers.

probably could by the trials and tribulations to get the refund would far too exhausting to achieve better to junk it and get a new one

There are various web sites on internet which are offering information relating to Smoothies. This sites are specially made for those folks who're on the lookout for Smoothies. For more information please see this site:http://smoothierecepty.cz

Not for the motor - perhaps for circuit breaker. If you overheated the motor by blending a liquid with excessive viscosity you may have burned out the unit. Or maybe the motor overheated and a protective thermistor has shut off power to allow it to cool off. Give it another hour or so before making any conclusions.

fixya doesnt sell products --do online search or small appliance repair shop

Check out what Ebay has - you might get lucky since lots of older stuff/parts are available there.

Unfortunately Back to Basics has decided to do all of their parts in house, so we can no longer get parts from them. We have none of the Blade Assemblies left in stock, so you will have to contact Back to Basics directly. Here is a link to replacement parts on their website: http://westbend.com/support/replacement-parts/smoothie-makers.html You can also call them if you cannot find what you need on their website, their number is 800-688-1989 Back to Basics blender blades Back to Basics small appliances and parts http://westbend.com/support/replacement-parts/smoothie-makers.html

Any local electronic parts store.

I'd be trying to sharpen the blades with a small sharpening stone.

It's supposed to reset when it cools down. Put it in the freezer for a few minutes.