Top 20 DeLonghi Nespresso EN660 Espresso Machine - Page 9 Questions & Answers

yes that would be right which machine is it

Error red light you may have to replace grinder

Switch the machine off, AND pull the plug, wait 5 minutes (to be sure) and turn it on. Then turn it off again, now the infuser should return to it's normal position where you can take it out. If the descale button is still flashing, try descaling again. Was the procedure interupted before? That would be a reason the light keeps flashing. Bert

Probably time to buy a new machine.

is the water pump making noise? is the water coming out of the pump? replace pump

The tube or the nozzle? If the nozzle is plastic you need to examine the threads to see if they are damaged..

Could not find why but maybe if you go back over the scaling procedure and steam procedure there might be something you missed. Please note! If "Energy saving" is active, you may have to wait a few seconds before hot water and steam are delivered. Steam delivery 1. Make sure the hot water spout is attached correctly (fig. 7). 2. Fill a container with the liquid to be heated/frothed and immerse the spout/cappuccino maker (D5) in the liquid. 3. Press the steam ( ) button. After a few seconds, the steam to heat the liquid comes out of the cappuccino maker and "STEAM" is displayed. 4. When the required temperature is obtained, interrupt steam delivery by pressing the steam ( ) button again. (You should not discharge steam for more than 3 minutes at a time). http://www.delonghi.com/Global/InstructionManuals/EN/EN-PrimaDonna-ETAM36365M-im.pdf customer support Customer Support

Try eSpares .uk

There's a float in the watertank that should go up when the tank is full. A sensor in the machine will tell it that there's enough water in the tank. So, the float can be stuck, if not then maybe there's something wrong with the sensor. Or, worse, the main board is broken. Hope this helps a bit.

Have a look how much coffee is actually thrown in by the machine. You can take a flash light and look down the ground coffee funnel, when the machine is grinding. Or after making a cup of espresso, look in the tray how much coffee it dumped in there. I don't think the infuser is the problem. I expect there's a problem with the grinder...

There's a float in the watertank, is it going up when the tank is full?

HAVE YOU FOUND A WAY TO TURN MILK INTO GOLD?

you need a new one or have it serviced and fixed by a technician

does it have a power light on or not lite up ? if so you have power to the machine ? if so . the thermal fuse will have blown and is not re-settable .it is in line of the power cord and or along the water heating tube as a thermal indicator to blow when too hot for human consumption ..nice huh it is a size of an aspirin not soldered only crimped style radio shack has them rated at about 8-10 amperage of two for $ 12.00 bucks or so. manufactures make it so it is a throw away sociaty they are made in bing dow chi chi mow countries and you can afford to buy another , not us we are smart and us a thermal breaker that is re-settable but it alone is $ 15.00 bucks but I have several that I gave out to less fortunate families through the years, because I hate filling up land fills with trash that can be fixed..that who I am ..mybad...if it is worth the trouble you can fix it with a test meter and fillips screw driver and such...if you paid 20-30 dollars ?? happy trails >^.^<

This will take you the Delonghi site that will give you contact option and get a free instruction manual

You probably need to replace the valve. Have a look at the video. Hope this helps.

Here is a youtube video showing how to reset the infuser. https://www.youtube.com/watch?v=CKrxIkdSKb4

There isn't such a thing as hard reset on this machine. You can turn on test mode and test machine functions. http://s-coffee.ru/dt/ecam23.450.s.pdf

The grinder time is set by an internal timer. You may be able to purchase a replacement timer. But to go further we will need the Model number.

from delonghi