20 Most Recent Apple iPhone 3G - Page 5 Questions & Answers

Hi, did you pair the iPhone with the car, using Bluetooth? it sounds like the car is expecting you to connect a headset so that you can bet heard using the headset's microphone. if you did pair the iPhone with the car using Bluetooth, then look into the car's menu to see how you can choose which device can be used while you speak... the iPhone or a headset. good luck!

Did you forget passcode to get into iPhone? If so, you can try below method to unlock it. If you've neither synced with iTunes nor set up Find My iPhone in iCloud, you'll need to wipe your iPad to factory setting to remove the password, which means you'll suffer losing all your data on iPad and get it as a new one. Please pay attention there is a slight difference in putting different models of iPad into recovery mode. iPad Air

• 1. Turn off your iPad Air, press and hold the Home button.
• 2. While holding the Home key, connect the USB cable to the device. Wait until the Apple logo appears and keep holding the Home button for few more seconds.
• 3. Continue holding the Home button until the iTunes logo appears.

iPad mini/iPad pro

• 1. Connect your iPad to your computer or laptop and open iTunes.
• 2. While your device is connected, force to restart it.
• 3. Press and hold the Sleep/Wake and Home buttons at the same time. Don't release when you see the Apple logo. Keep holding both buttons until you see the recovery mode screen.

Now you have entered the recovery mode, and 1. When you see the option to Restore and Update, click it. 2. Wait for the process to finish. Then you can set up and use your device. For more methods, check: How to Unlock iPad?

If you forgot passcode to unlock iPhone, you can still resort to iTunes to unlock it. Just follow below steps to reach this aim.

• 1. Connect iPad to the computer you have synced with.
• 2. Open iTunes on your computer and connect it with your iPad. If fortunate, you can enter the iTunes without password. But in most cases, there would be prompt asking for a pass code. Try another computer you've synced with, or use recovery mode. (The recovery mode will be mentioned in method three.)
• 3. Find your iPad in summary and make a manual backup. Once the backup have finished, click Restore your iPad with the most relevant back-up.

For more methods, check: How to Unlock iPad?

Did you forget the password? If so, follow below steps to unlock it. If you've neither synced with iTunes nor set up Find My iPhone in iCloud, you'll need to wipe your iPad to factory setting to remove the password, which means you'll suffer losing all your data on iPad and get it as a new one. Please pay attention there is a slight difference in putting different models of iPad into recovery mode. iPad Air

• 1. Turn off your iPad Air, press and hold the Home button.
• 2. While holding the Home key, connect the USB cable to the device. Wait until the Apple logo appears and keep holding the Home button for few more seconds.
• 3. Continue holding the Home button until the iTunes logo appears.

iPad mini/iPad pro

• 1. Connect your iPad to your computer or laptop and open iTunes.
• 2. While your device is connected, force to restart it.
• 3. Press and hold the Sleep/Wake and Home buttons at the same time. Don't release when you see the Apple logo. Keep holding both buttons until you see the recovery mode screen.

Now you have entered the recovery mode, and 1. When you see the option to Restore and Update, click it. 2. Wait for the process to finish. Then you can set up and use your device. For more methods, check: How to Unlock iPad?

Yeah, there are quite a few iPhone photos recovery software like Leawo iOS Data Recovery. It can help you recover lost photos from iOS device directly. Just follow below steps to do that. Step 1: First you'll need to download and install Leawo iOS Data Recovery on your computer. And then fire it up. On the main interface, click on the first tab to enter the Recover from iOS Device mode. Step 2: On the device list, choose your iPad and click the Start button to start scanning all the data on your iPad. Step 3: When the scanning process is done, you'll be able to see all the retrievable data on the interface. Click on Camera Roll to check out the photos. Check the Only Display the Deleted Items option to see the deleted photos only. Step 4: Choose the photos you'd like to recover to your iPad, and then click the Recover button at the bottom right. Step 5: A window would pop up and prompt you to set directory for the backup of the photos you've chosen. Click Go button at the bottom of the window and the program would start recovering the photos you've chosen to iPad and at the same time saving them to the location you chose previously. For more details, check: How to Recover Deleted Photos from iPad

Generally, the default passcode can be 1234 or 123456, and the digits rely on the blank number. However, if the default passcode doesn't work, you can still reset the passcode through below steps. If you have synced your iPhone with iTunes before you forget your iPhone password, you can reset your iPhone by using iTunes without losing data. Through iTunes, you can restore your iPhone from the last backup and remove the passcode from your locked iPhone while retaining your data. If iTunes asks you to enter the passcode, try another computer. Otherwise, you have to follow the reset iPhone Passcode with Recovery Mode section below. The following steps will show you how to reset iPhone password with iTunes. Step 1. Connect your iPhone to the computer with via a USB cable that your iPhone has trusted. Step 2. Launch iTunes. If you've synced your iPhone with iTunes, then no "enter password" is required. Step 3. iTunes will automatically sync your iPhone and create a backup file. If it doesn't, you should sync your iTunes and create a backup file manually by in the Summary window. Step 4. In the Summary window, you can see the option "Restore iPhone". Click it and follow prompts to choose the latest iTunes backup to restore your iPhone. After the restoration process is complete, your passcode will be erased and all your data will be restored from your backup. You will now be able to access your iPhone without any passcode. And you can set your new password on iPhone. For more details, check: How to Reset Password on iPhone

You can try Leawo iOS Data Recovery to fix this issue and it's effective in restoring iPhone in DFU mode. Just check below steps. Step 1. Run Leawo iOS Data Recovery and choose Recover from iOS Device. Step 2. Connect iPhone 4 to computer with USB and choose DFU in the pop-up dialog. Step 3. Follow the tutorial and enter DFU mode on your iPhone 4. Step 4. The program will communicate and scan your iPhone 4. When the scan is done, select the files you need and click Recover. Step 5. Click Open in the pop-up dialog to choose a target folder on your computer to save the files. Then click Go to recover deleted files from iPhone 4 under DFU mode. When the recovering process is done, you will get the files in the target folder. If you want to exit DFU mode on your iPhone 4, you only need to click Exit DFU Mode at the left bottom of Leawo iOS Data Recovery. For more details, check: How to Enter DFU Mode and Recover Deleted Files from iPhone

Ok, click on purple iTunes app logo. Easiest way is to hit search at bottom centre left of screen and type in the name of album or artist. Then select the required album and it will then take you to a breakdown of songs on album. Click on any song title to sample the song (free 15secs of song to check if it is correct). Then click buy or click on any icon with price on it, the icon will turn green and ask "buy now" then click that and hold for a second. If you have an itunes account set up it will bill your account and download song to you library where you can search for it by name. If you dont have an iTunes account setup I can help you there too.

Hope this helps and if so please vote.

Thanks

Jim

That model is a 3GS iPhone.

how to install themes in A1101 iphone

iPhone setting:*
- Auto-Lock: 1 Minute;*
- Passcode Lock: On, require passcode immediately, after 15 min or 4 hours etc;*
- Network: Turn 3G Off

Scenario 1: Home screen is active with screen on*
1. Press power button for seconds until asked to '"slide to power off"
2. Slide to power off
3. press power button to turn on iPhone
4.*When asked to enter passcode, touch the "Cancel" key, then slide to unlock
5. bypassed passcode

Scenario 2:*
1. On the screen of being asked to enter passcode, press power button for seconds until asked to '"slide to power off"
2.*Slide to power off
3. press power button to turn on iPhone
4.*When asked to enter passcode, DO NOT touch any key on the screen, press power button for seconds until asked to '"slide to power off"
5. Slide to power off
6. press power button to turn on iPhone
7.*When asked to enter passcode, touch the "Cancel" key on the right bottom corner, then slide to unlock
8. bypassed passcode

Notes:
1. When Network setting changes to Enable 3G: ON, "3G" signal shows up, passcode CANNOT be passed through
Go to a underground parking lot or a lift where 3G signal is weak, when 3G signal switches to "E" (Edge), passcode CAN be passed through following above steps
2. When no 3G or Edge signal, above steps don't work

Conclusion:
Seems passcode security is related to network status
Possible security hole under Edge

Generally, the default passcode can be 1234 or 123456, and the digits rely on the blank number. This small trick is useful and some users are fond of this method. This solution can be workable and effective to help you to unlock iPad passcode without restoring. However, if this doesn't work, check: Fixed: iPad Asking for Passcode I Never Set

Start by tapping the "Phone" icon on your iPhone.

2 Next, access your voice mail messages by tapping the "Voicemail" icon.

3 Look at your list of current voice messages. If you have any messages that are eligible for recovery, you'll see an item at the very bottom called "Deleted Messages". Tap on this to access a list of your deleted messages.

4 You should now see a list of deleted voice messages. If you see the message that you want to recover, tap on it and choose "Undelete".

5 Your voice message will now be sent back to the main list of current voice mail messages.

6 Repeat steps 1-5 for "each" message you wish to recover. This may take time!

Read more: How to easily recover accidentally deleted iPhone voice messages ' eHow.com http://www.ehow.com/how_4707121_accidentally-deleted-iphone-voice-messages.html#ixzz1A58SmNWv

How to Unlock/Fix a Disabled iPhone - "I forgot my iPhone ...

? 7:34 https://www.youtube.com/watch?v=DjEw6DPGYiY Jan 7, 2015 - Uploaded by Full Screen Ahead 4.) While holding the circle button at the bottom of your iPhonedisplay, ... Your PC or Mac will say "iTunes has detected aniPhone in recovery mode. ... says "Are you sure you want torestore the iPhone to its factory settings?

How to remove/reset any disabled or Password ... - YouTube

? 5:31 https://www.youtube.com/watch?v=csLUmaDTHl4 Oct 30, 2014 - Uploaded by Karlos Corner How to remove/reset any disabled or Password locked iPhones6S ... Thank you for watching, please feel free to comment, likethe video or subscribe to my ..... Iphone Disabled / Forgot Passcode iPhone Fix - Hard Reset for ...

Hard Reset for iPhone 6/5s/5c/5/4s - YouTube

? 3:21 https://www.youtube.com/watch?v=C8OCbVO8r6g

solution 1:

put the memory card in your mobile and connect it to the pc and take a backup of the data and then format the memory card .
or use java application to recover the password

solution 2
For S60 1st and 2nd Phones
What should we do if we forget the password? For S60 1st and some of 2nd phones, such as Nokia 3650, Nokia 6600 and Nokia N-Gage, the password is stored in a plain text file.

• Firstly, you need to install FExplorer, a free file manager that allows us to browser through S60 file system.
• Next, launch FExplorer and then browser to c:\system folder. There is a file, called mmcstore.
• Rename the file to mmcstore.txt and then open it. Your password must be several characters at the end of the file.

For S60 3rd Phones, Nokia N-Series and Nokia E-Series
Unfortunately, there is no way to recover the password in the latest S60 phones. The only way that I know so far is by reformatting the memory card. It can be done from Memory Card application by selecting Options | Format memory card menu. Of course, you will lose all your data in the memory card…
If any of you have experience unlocking password of memory card in latest S60 phones, feel free to share it here.
Compatible devices: S60 1st, 2nd, 3rd Edition, Nokia Nseries, Nokia Eseries.
Update (27-Mar-07): I have written another posting about password-protected memory card on Another Tip for Password-protected Memory Card. This mostly applies to Nokia Eseries.

you have to download the fexplorer -java application using your mobile .

If you want to recover photos from your Android phone, you can use other Android data recovery. Usually, if you Android phone can be detected by pc, android data recovery can recognize it easily. Android Photos Recovery How to Retrieve Deleted Photos from Android Phone

the same exact thing happen to me......then I purchased a new connector (I used the old usb so much with the ipod)...and bingo itunes recognized the iphone......

Yes they can, but I don't think it's done easily. I was on jury duty for a trial in 2009, and part of the evidence presented were transcripts of text messages sent back and forth, that were obtained by police.

As for this situation, I think you'd better try the 3rd-party program rather than iTunes. Just follow below steps to reach this goal. Download Leawo iTransfer ' Leawo iTransfer for Mac and install it. Step 1. Run Leawo iTransfer for Mac and Connect iPhone Launch Leawo iTransfer for Mac after installing it on your new Mac computer. When the software indicates that you can connect your iOS device, plug your iPhone to Mac via the USB cable. The software will automatically detect your iPhone and show the Libraries on the left sidebar. The files will show on the right part of the window after you choose a library. Step 2. Select Files to Sync Choose a Library and then all the files in the library will show on the right part of the software (Set the Music Library as an example). Click the transfer button (the right arrow in a dark-blue rectangle) at the right bottom to transfer all the files to computer. Or you can hold Ctrl key and click to choose certain files, and then right click the chosen files and choose "Transfer to > My Computer". Step 3. Transfer Settings After choosing files, a dialog of transfer settings comes out. In this dialog, you are able to check "Transfer to List" and "Save to Folder". Checking "Transfer to List" can make sure your files be transferred to iTunes; Check "Save to Folder" and click "Change" to choose a target folder to save the transferred files. If you are using a new computer and the iTunes is newly installed, I suggest you check both options. After choosing target folder, click "Transfer Now" to start to sync iPhone to new computer. Step 4. Syncing iPhone to New Mac When the transfer begins, you will see a dialog of transfer process. A progress bar in the dialog will show you the percentage of the syncing process. When the syncing process is finished, you will find all the files in your target folder and iTunes. For more detail, check: How to Sync iPhone to New Mac without Losing Data

You can do this in iTunes - with the iPhone connected select the 'photos' tab and deselect the folder containing the photos, then hit Sync to remove them.
Alternatively, just move the photos to a different location on your hard drive (out of any folder that is set to sync to iPhone), then connect to iTunes and hit sync.
Hope that helps!