It seems that most 4 button electronic watches have similar directions. There should be four buttons. Clockwise from top left is the Light button, followed by S2 (Stop), S1 (Reset) and finally on the lower left S3 (Mode). Who knows why they are numbered this way. To set hourly chime Hold down S1 and press S3. When all 7 day flags show the chime is on. When they are off the chime is off. To set the alarm hold down S1 and press S2. Alarm icon will display or go off. Release S1 button and display will return to normal time. Hope this works for your watch
Adidas do not list their watch instructions by model but give a complete list of all the various models they make, including a picture of the watch face.
(I suspect that you press the mode button (8 O'clock) to arrive at alarm (AL?) and the press the one at 4 O'clockto disable it but to be sure you need to find the correct instructions) Good luck!
Press the top button on the right-hand side of the watch to view time.
Press the bottom button on the right-hand side of the watch and hold for two seconds.
Press the top button on the right-hand side of the watch to choose a 12-hour setting or 24-hour setting. Stop when the desired format appears.
Press the bottom button to change to time set mode.
Press the top button until the desired time appears. Press the bottom button to exit time setting mode. The watch is now set.
jQuery('.article ol .image').each(function(i,e){
var $this = jQuery(this);
$this.find('img').error(function(){
jQuery(this).remove();
$this.remove();
});
});
Best regards. Jewel
mcdevito75 here, One of the buttons should say MODE, press this mode button and see the display blinking, then press set for each function, hour, minute etc, after each function is set press mode again to move onto next function, hour, minute etc. when all functions are set press mode again for steady display.
Hi, Go to mode and scroll to select alarm setting.Look at the display of
your watch if you see the icon of the bell there,it means its alarm
hourly,if you off the alarm the bell icon of the display will gone,so
it will not alarm. Hope i helped you. Thanks for using ' Fixya ' and have a nice day!!
hi, you just go to the time option and when your on it. you hold on the right bottom hand button 4 5 secs, then the first part of time should beep and then using the top right hand button you keep clinking it until you chnge the hour time, then press the right bottom hand button once to make the mintues beep and then using right top button you change the mintues and press the right bottom button to cofirm and then you can get out of it. rate me.
go to mode and scroll to select alarm setting.Look at the display of your watch if you see the icon of the bell there,it means its alarm hourly,if you off the alarm the bell icon of the display will gone,so it will not alarm..
If your Adidas Archive M1 watch is "blocked," it is likely that the watch's movement has stopped working properly. This can happen for a variety of reasons such as a dead battery, a malfunctioning quartz crystal, or a problem with the gears or other internal components.
To fix this issue, it is best to take the watch to a qualified watch repair professional who can diagnose and repair the problem. They can determine if the problem is a minor one that can be fixed quickly or if a more extensive repair is needed. Additionally, you can try the following steps:
Check the battery: If the watch has a battery, make sure it is still good and replace it if necessary.
Check the crown: Make sure the crown (the knob on the side of the watch) is not in the "pulled out" position. If it is, push it back in.
Check the time: If the watch has stopped working, try resetting the time and see if that fixes the problem.
It's also a good idea to refer to the manufacturer's manual for troubleshooting steps and warranty information, as some issues may be covered under the warranty.