20 Most Recent
Linksys WRT54G2 Wireless Router - Page 5 Questions & Answers
I have an linksysE1000 and
can u reset the router to factory default and reconfigure the router just type 192.168.1.1 on internet explorer go to admin TAb choose reset to factory confirm that and wait for 1 minutes for router to boot after that enter the same configuration you have entered that i assume that you did this already if you have any question please contact me on
http://computernetworksupportindubai.com/
I need a password for
IF you didn't set a password then at the login screen :
Login ... leave blank ( some models use the word admin)
Password admin
IF you set a password and forgot it you need to restore the unit back to defaults and erconfigure the router
To restore press the reset button using a toothpick or similar item. Its located on the back next to the WAN port connection
Our router did not perform when connecting to our
If you want to reinstall the router:
1.Press and hold the reset button for 20 seconds. Uplug the power cable and plug it back again
For DSL connections:
>Open internet explorer, type 192.168.1.1. Leave the username blank and for the password is "admin".
>change the Local IP address under Setup Tab to 192.168.5.1
>restart the computer and that should go.
For Cable connection:
>Open internet explorer, type 192.168.1.1. Leave the username blank and for the password is "admin".
>click on the subtab that says "MAC Address clone"
>enable it and click on "clone my PC's MAC"
>Save the settings and that should be good to go
>IF that did not work, perform power cycle. Turn of the modem and the router. Wait for 30 seconds and power on the modem first, wait for 30 secs and turn on the modem
Good day!
I found a dumped
That router must have got a lot of water in it and powered on thats why it has shorted and all the lEDs on it are glowing. Last resort before dumping it (beyond economical repairs) is to give it a factory reset.
I am installing a new
These information should be provided by your Internet Service Provider. If not, you may find it on a sticker or label at the bottom of the router. If still fails, you may try to access the router's page
here . Just follow the steps.
Hope this helps.
Cant connect to linksys router
Most modern DSL modems operate as a NAT. If you plug directly into the modem and get an IP address that starts with 192.168, the modem is the NAT. Instead of connecting the modem to the WAN port on the router, connect it to one of the LAN ports.
To see what your IP address is, assuming Windows, open a command window. At the command prompt, type "ipconfig" (without the quotes) and hit Enter. It'll return your computer's IP address.
The simplest way to test this is to simply connect the modem to the #1 LAN port, using the supplied ethernet cable. Power the modem and router down. Fire up the modem. When it's active, fire up the router. Now connect and see what happens.
Forgot my linksys WRT54G2 router
Wasn't it taped to the bottom of the router :-)
The key is set by the router installer. There is a login and password (by default admin and password) that gets you to the router setup web page. From there, the Wireless security type and key is entered.
When you first take the router out of the box, you plug a network cable into one of the 4 ports, turn on a PC, and go to the default IP address (usually 192.168.1.1) of the gateway. It opens up a box that logs you into the web setup page where you specify how the router works. A lot of people forget to change the router password. That's not good, because anybody with access to your network can change the router password and you then have to get out the paper clip and reset the router if you ever want to get back into it.
Check your installation manual or Cisco/Linksys website for a manual and setup instructions if you can't get into yours.
Carl
Its not accepting my usename or passowrd, how do I
Try hitting the tiny reset button in the back; it is very small and you will probably need a pencil or paper clip to press it. This SHOULD reset the password, but if this doesn't fix it, you will have to call your ISP(Internet service provider) and they can fix it for you.
Every 2 hours it stop
check you configuration settings properly or reset it to default settings. if it continues suggest you get it fixxed
Password problems....(forgotten)
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.
Where is the AOSS button
On that router, you may be looking for an SES button, which is more or less the same thing. Hope that helps!
Not finding what you are looking for?
