Top 20 Razor Dirt Rocket MX 350 Electric Motorbike - Blue Questions & Answers

Try connecting the red wire to the + battery post and the black to the - post.

Take it back to Walmart

Here is the link. Watch it.

Question edited for clarity. There are some ideas here. If they don't work, contact Razor Support. https://www.google.com/search?q=mx+500+razor+solenoid ..

SHOULD BE A RETURN SPRING ON IT

Thoughts - No/poor connection between power source and motor Motor failure Only someone with their hands on the bike can fully diagnose.

I suggest you call a razor customer service person.

Hi, You'll need to remove the keyswitch itself & either take it to a locksmith to have a replacement cut from the barrel or replace the entire keyswitch with a compatible replacement unit.!

it is a old charger ?

The off and on switch lights up but will not start.

http://www.scootercatalog.com/ottrshti.html
This site has everything to check if scooter is not running regarding fuse problems. If you need further help, reach me via phone at https://www.6ya.com/expert/kelley_9a924afdf232bd4d

Too many possibilities. Do a google search for "Razor mx 350 repair" or "repair electric bike" I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

There is no serial number database for those bikes https://www.google.com/search?q=white+super+chief+bicycle+date+of+manufacture https://www.google.com/search?q=white%27s+super+chief ..

Standard WD40 is just a 'quick fix' as it isn't an actual oil unless the can is clearly labelled as "Bike All Condition Lubricant". It'll be best to buy a proper light oil like 3in1, 151 Super oil or an actual chain lube. This 'clickey' noise. Is it random and happening every so often or is it a constant, regular click that changes with the speed your pedalling at? Check for slack in the chain. as you wiggle the chain up and down there should only be about a centimetre of movement in the chain. If it's too slack or too tight it can make strange noises. Check the axle bolts and nuts to make sure they're not loose. Check the wheel is mounted straight. If it's turned left or right the chain will 'skip' as it's slightly missing the cog teeth on the wheel. Use the frame at the rear end of the wheel as reference and measure how far the side of the wheel is from the frame on both sides. It should be about the same both sides.

No, not easily, but you could fix it possibly? https://www.google.com/search?q=edge+491+electromagnetic+bike ..

It is a very standard bike, this manual will do just fine. It has normal caliper brakes. https://images-na.ssl-images-amazon.com/images/I/C1i84aprpSS.pdf https://bikeindex.org/bikes/1022118 https://www.google.com/search?q=Nishiki+Manitoba+manual

1962

You are using the wrong terms although 'pedals' is correct. The 'shaft' is called a 'crank' or a 'crankset'. https://www.google.com/search?q=Nishiki+Tamarack+crankset+and+pedals General Parts https://www.google.com/search?q=Nishiki+Tamarack+parts+website ..

dont think you have one believe 89 started having them ------https://www.justanswer.com/ford/1e5mr-1986-ford-ranger-2-9-liter-spark-fuel-pressure.html

https://www.manualslib.com/manual/2133567/Rogue-Echo-Bike.html