20 Most Recent Nordic Track C2400 Treadmill Walking Deck - Page 8 Questions & Answers

try pressing the reset button on the bottom of the treadmill, located toward the bottom front roller area

By "no power" do you mean that the display and lights do not come on? Or just no motion?

Most likely you need to replace the motor and MCB. I might have these parts in my shop. Also check to see if the front and rear rollers are moving freely by disconnecting the drive belt. Shoot me a email at [email protected] for parts

I think you have a worn or lose fan belt nothing to do with the motor

Hi, Check the video to know how to tension the treadmill belt . http://electro-medical.blogspot.in/ google.com/+AjinGopakumar

Sounds like your belt is slipping. Check your manual, it'll probably tell you how to service it.

Hi Holly, please let us know what model of treadmill you have. Basically, there should be a 3-pin connector from the lift motor to a 3-pin plug, with rather large pins, near a couple or Triacs (Transistor looking things) that are bolted together. If you find this correct, you can turn off the treadmill, carefully reverse this cable 180-degrees, and theoretically you will be driving the opposite winding of the one causing you to lift incorrectly. This only gets the deck back down, and won't stop your troubles, as the assembly will now be trying to drive the lift down. There can be a few causes... 1) "Up" lift button stuck 2) console electronics gone haywire(unusual) 3) lift assembly feedback lost, missing, incorrect(bad lift) 4) failing control board Triacs(either/or failing causes trouble) Lasstly you can contact jatinah electronics for additional help. Good Luck!