Question moved from Motorcycles category??
If it doesn't exist to Google, it may be a Chinese copy to 'a style'. Nothing comes up on the Model Number, but I found 'SII Tiger Cat Watch'. Click on the images tab to see if yours is there?
https://www.google.com/search?q=sii+disney+tiger+cat+watch
The watches are made by Seiko
It's simple to change the time on a Fanmis sport pedometer. To get to the "Time" setting, all you have to do is keep pressing the "Mode" button. Then, after pressing the "Set" button, change the time using the "Start/Stop" and "Reset" buttons.
Once the time has been set, you may resume recording your steps and working toward your fitness objectives. After all, if you want to keep healthy, time is of the essence!
you cannot do this yourself ..try the manufacture or a competent repairer some crystals have to be made by hand if theres not one available through the trade repairers..
Question edited for clarity.
Question moved from Misc to Watches.
https://www.fixya.com/support/r27181038-changing_watch_batteriesHow do I know what size battery for my watch?
Sometimes this is printed on the back of the watch - as with some Timex watches - but in many cases you will need to open your watch case to see the code on the battery. The code can take various forms such as: CR1216.
No one every tells battery types, because they vary. The answer is "the one that came out of it".
https://www.google.com/search?q=Swiss+legend+Monte+Carlo+watch+battery
..
Impossible to answer. On WHAT!!!
All questions need FULL 'make model (what it is)'.
Google
make model manual
Normally on that type of device you have to set the YEAR, and then the MONTH like on my Weather Station Indoor Unit..
..
To set the time on your Lasika W-F62 watch, please follow these steps:
Press the mode button on your watch until you reach the time-setting mode.
Press and hold the "Set" button until the hour digits flash.
Use the "Adjust" button to set the correct hour.
Press the "Set" button again to move to the minute digits, which will also be flashing.
Use the "Adjust" button to set the correct minute.
Press the "Set" button again to confirm the time and exit the setting mode.
If you have any trouble setting the time on your watch or if it doesn't seem to be working properly, please consult the instruction manual that came with your watch or contact the manufacturer for further assistance.
If your Dango watch's second hand stops intermittently, there are a few things that could be causing the issue. Here are some possible reasons and solutions:
1. Low Battery: If the battery in your watch is running low, it could cause the second hand to stop. You may need to replace the battery in your watch. Check your watch's manual or take it to a watch repair shop to have the battery replaced. 2. Dirt or Debris: Dirt or debris can get inside your watch and cause the gears to stop moving properly. If this is the case, you may need to have your watch cleaned and serviced by a professional watch repair person. 3. Loose Second Hand: If the second hand on your watch is loose, it could cause it to stop intermittently. A loose second hand can be caused by a damaged pinion or cannon pinion. You may need to take your watch to a professional watch repair person to have it fixed. 4. Magnetic Interference: Magnetic fields can interfere with the movement of the gears inside a watch, causing it to stop or run erratically. If you have been around strong magnets or electronic devices, it could be causing the issue. Try moving your watch away from these devices to see if that helps. 5. Mechanical Issue: There may be a mechanical issue with your watch's movement that is causing the second hand to stop. This can be caused by a worn out gear or other component. You may need to take your watch to a professional watch repair person to have it fixed.
