Top 20 Craig CMP741d Tablet Questions & Answers

1helpful
2answers

How do i unlock my tablet after ive entered too many pattern attempts, and have forgotten my Username(email) Password?

its brand new and you forgot everything already if you did the google mail password assist then open that if dont know that or didnt do it can try provider for assistance and most lockouts are either 1hr or 24hr
7/13/2017 4:30:04 PM • Craig CMP741d... • 646 views • 1 helpful votes
1helpful
1answer

My sons friend changed his password and everytime I go to reset it it just turns off. How do I reset?

  • First, switch your tablet off.
•Then, power the tablet back up by holding down the volume (either + or - ) and power buttons simultaneously. • Continue holding the volume button until the screen says "Booting tablet in recovery mode." • This will give you a picture of an Android. •Tap the android, and you will be given a screen with several options. •Move between the options with the + and -, and select with the power button. •Go to the option for Factory Data Reset and select it. •Scroll down to `the Yes, and then the tablet will erase its memory back to factory settings. •Once it has completed, select Reboot Tablet Normally.
8/29/2015 7:51:10 PM • Craig CMP741d... • 134 views • 1 helpful votes
0helpful
1answer

Is there a special tool to incert in the tini hole provide on my crcaig tablet to reset it.

Try a pin or a paperclip.
4/10/2015 2:06:18 PM • Craig CMP741d... • 94 views • 0 helpful votes
1helpful
1answer

When connected to charger red lights keeps flashing but tablet wont charge or switch on

Your dc socket is probably on its way out- soon it wont connect charge at all-bad future outlook on this- return if possible.
3/10/2015 5:42:12 PM • Craig CMP741d... • 173 views • 1 helpful votes
0helpful
1answer

I have no volume no sound Would a Hard Reset fix this problem?

A hard reset is worth a try but it is unlikely to fix the problem, it sounds like a hardware issue. Here are instructions for a hard reset Make sure the tablet is OFF. Press and hold the Volume Up and Power buttons at the same time. When the Android starts to flash, release the buttons. Then try to press different hardware buttons until you are given a list of options. Note: If Volume Up and Power doesn't work, try Volume Down and Power. I’m happy to help further over the phone at https://www.6ya.com/expert/jonathan_828b54f422cbefdd
12/25/2014 1:54:43 AM • Craig CMP741d... • 277 views • 0 helpful votes
3helpful
2answers

My tablet wont take a charge

what i did with mine was opened it up to expose the inside i found that a few wires and plugs had wiggled them selves lose.I put it back together and it worked.craig makes these tablets very cheaply.i will never by another craig product again.i now have a samsung 3 and love it bo issues what so ever.got tired of all the problems i had with craigs tablets and gave it to my niece.hope this helps.
10/17/2014 1:31:51 AM • Craig CMP741d... • 264 views • 3 helpful votes
0helpful
1answer

How to reset my tablet to factory setting

So easy, just look arround your tablet and find a small hole that says Reset Just press it for more than 10 seconds turned on and that is all.sets at Factory default. with that you will erase all, even passwords
9/22/2014 3:20:15 AM • Craig CMP741d... • 385 views • 0 helpful votes
0helpful
1answer

Why doesn`t my icraig tablet load?

contact craig and have them mail you a memory card with os on it unless they have it listed on website.-
8/2/2014 9:30:01 PM • Craig CMP741d... • 543 views • 0 helpful votes
1helpful
1answer

Forgot password on icraig jelly bean how do i reset it

First, Turn your device off. Now, press and hold the down volume button, while holding down the button, press the power button until the display turned on. then go to recovery by navigating up and down through the volume buttons. Then quickly press the power button to confirm. And there, your device will start resetting to factory default.
6/9/2014 1:29:52 AM • Craig CMP741d... • 283 views • 1 helpful votes
1helpful
1answer

How do i hard reset my tablet?

look for a reset hole arround the device.just press it for more than 10 seconds and it is all(always the reset hole is near the pluggings holes like charging,earphone,USB connection)it is a very small hole that you have to use a pen or an unfolded clip
6/19/2014 6:20:52 AM • Craig CMP741d... • 118 views • 1 helpful votes
0helpful
1answer

How to check for missing drivers

Adb Drivers in windows for interfacing with the tablet or drivers within the tablet? If its within the tablet you will need to shell su and have the device rooted - In other words you will need to be technically savvy and good with linux command line!
5/12/2014 11:47:40 AM • Craig CMP741d... • 140 views • 0 helpful votes
0helpful
1answer

I want to reset my android tablet 10.1

i found this for the 741e model so i guess it's kind of the same no reset support for this one please talk to Craig for solution if not i would try flashing a new FW (download from manufacturer for your model see the document of the 741 attached CMP741e password recovery or factory restore
4/18/2014 3:33:55 PM • Craig CMP741d... • 207 views • 0 helpful votes
0helpful
1answer

My tablet won't hook up to the wifi where live. My laptop and and my other tablet hooks up 1st time

What type of router do you have? B,G,N I would guess your router is b/g and you need N.
6/9/2014 1:26:33 AM • Craig CMP741d... • 54 views • 0 helpful votes
0helpful
1answer

I need some drivers for i craig tablet usb cord driver

If you plan is to do Android Programming, you just need to download adb, or a rooting kit like RootThat. If you plan to just transfer files to it, BEFORE plugging in the USB connector, go to SETTINGS, scroll down to USB, and turn off "HOST MODE". Now plug in; the tablet & the computer should recognize each other.
3/14/2014 10:09:17 PM • Craig CMP741d... • 525 views • 0 helpful votes
0helpful
1answer

How can i use craig tablet without that has touch screen broken

hook up a bluetooth key noard.
5/15/2014 12:35:42 AM • Craig CMP741d... • 75 views • 0 helpful votes
0helpful
1answer

My i craig won't boot up it stuck on loading sceen?

I would advise contacting the manufacturer for troubleshooting tips, and/or seek repair/replacement options.
4/16/2014 6:13:31 PM • Craig CMP741d... • 139 views • 0 helpful votes
0helpful
1answer

Authentication problem

trying dumbing down the authentication on your wifi router. Try these: turn off 40mhz wide channels try wpa instead of wpa2 try tkip instead of aes if all else fails, try wep.
2/11/2014 9:34:34 PM • Craig CMP741d... • 748 views • 0 helpful votes
0helpful
2answers

Cannot download apps

tablet cannot download apps
3/5/2014 3:00:49 AM • Craig CMP741d... • 292 views • 0 helpful votes
0helpful
1answer

Need usb,drivers for xp .So i may hook tablet up to my pc.Thank you anyone can please provide me with this .I thank you so much.

Hi the drivers should be installed when you connect your tablet to pc, look for icon in notification area when you connect the device and also check tablet. It should recognize it as a storage device.
4/3/2014 2:44:55 PM • Craig CMP741d... • 106 views • 0 helpful votes
0helpful
1answer

Screen stays black nothing happens,,charer light comes on when plugged in

I always had to press one of the buttons on the side before the screen would come on for me to unlock the tablet, try it. :)
4/7/2014 3:08:36 AM • Craig CMP741d... • 95 views • 0 helpful votes
Not finding what you are looking for?
Craig CMP741d Tablet Logo

423 questions posted

Ask a Question

Usually answered in minutes!

Top Craig Tablets & eReaders Experts

john h

Level 3 Expert

29494 Answers

 Mikey
Mikey

Level 3 Expert

6904 Answers

Larry Ng
Larry Ng

Level 3 Expert

14606 Answers

Are you a Craig Tablet and eReader Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Craig Tablets & eReaders

  • Craig Tablets & eReaders

Most Popular Question

unlock tablet after ive entered many

  • Tablets & eReaders
Loading...