20 Most Recent Cabela's Alaskan Guide Binoculars Questions & Answers

I agree with you on that! I have a feeling they are either Nikon or Leupold sourced. The body is alot like green ring leupold ive seen but the lenses have a magenta multicoating on a lens surface which ive seen on nikon. I'm in the process of looking for the maker of them myself as I need an objective lens. I'm going to call the Cabela's Cust SVC number and see what they say. I've heard the new Euro styled binoculars are made by Meopta.

Ask your local vet.

for what?

The serial number does not reflect the date of manufactuer, but there are letters stamped in the side of the barrel at the reciever, on the left side, they are a date code, I will give you an app, If there are more than a couple letters and numbers, it has been reworked by the factory. But none of mine have.
m=1921,,,z=1931,,, and all the letters in between there except for o and q are the years, then it starts again at A=1932, and goes to L=1942, then,,,MM=1942,,,NN=1944,,,etc to ZZ=1953,,,then it stats with A again,,through Z= 1975 and after that it a random of letters I,O, Q and V, to 1979, then A, again, to Z=2005, then it starts again. hope this helps.

It's 1 of 3 and neither can be proven to be the dirtiest without studies

1. Gangga in India
2. Sarno in Italy
3. Citarum in Indonesia

You must have the correct rings for your base. If the scope has rimfire dovetail rings already attached, it should be easy. Remove the 4 setscrews on the top of the receiver, install the dovetail mount (use blue locktite and DO NOT TIGHTEN THE SCREWS MORE THAN 10 IN/LBS! Otherwise you may strip the threads in the receiver!).Loosen the clamps, place the scope on the dovetail mount and tighten snugly.

If it has weaver mounts, you will need to install a weaver rail to your receiver. Remove the 4 setscrews on the top of the receiver, install the weaver mount (use blue locktite and DO NOT TIGHTEN THE SCREWS MORE THAN 10 IN/LBS! Otherwise you may strip the threads in the receiver!). Install the rings in the weaver slots, tighten snugly.

Go Here:

http://www.outdoorpros.com/How-To-Guides/How-To-Zero-A-Rifle-Scope/5

for info on how to zero your red-dot after you have it mounted.

Hi Mark.

We need to know the binocular manufacturer to find the part. The n.70604012 does not return any known model.
Please tell us name of the manufacturer.

Thanks.

hi deshwashin error vod d13 brandt thnks

Yes I do

Visit your local gun shop and have them order them.

copy and paste https://www.bhphotovideo.com/lit_files/90269.pdf

900,000-925,000 made in 1956 https://www.google.com/search?q=savage+stevens+model+94+serial+number+lookup ..

its just 1-2-3-4- with the port bank being 2-4 starting at the top and the starboard side being 1-3. They're all the same be it V-4 or V-6. 6=123456 60* and 90* are the same

If the batteries are worn out or have not be put in properly. You may have to resync your devices the the USB receiver.

1949

Question edited for clarity. Duplicate Question deleted. It doesn't seem to be available https://www.google.com/search?q=Franklin+Chef+FCE-42R+manual ..

All question need FULL 'make model (what it is)'. You posted to optics, so let's guess is a telescopic rifle sight? It is impossible to see and movement as the crosshairs move such a tiny amount. Half a millimetre in the sight is 10 feet at the target. The only way to zero in sights is on a fixed bench rest at the range. If you really think they are faulty, return them to the maker for repair.