Setting the Clock
1. Press and hold the HOUR button for 5 seconds (Fig. 5). The time will begin to
flash2. While the time is flashing, press the HOUR button until you reach the correct hour. Then press the
MINUTE button (Fig. 5) until you reach the correct minute.
NOTE: PM indicator will appear on the left side of the clock face for evening hours (Fig. 5). If the
PM indicator is not illuminated, the hour is set to AM. Be sure to set the time for the correct
12-hour period – AM (morning) or PM (evening).
NOTE: After 5 seconds, the time will stop flashing and it will be set.
Or you can get the manual on link below.
http://dl.owneriq.net/8/8d1e2825-5a40-9324-7da1-d1032a958d4f.pdf