20 Most Recent
Euro-Pro Steam Generator EP8001 Iron - Page 9 Questions & Answers
Conair steamer green light comes on but low water
www.
conair.com/how-to-use-the-
conair-reg-deluxe-f...
Conair CorporationThe Conair® Deluxe Fabric Steamer (model # GS11DR) conveniently rolls to any spot in your ... This unit comes with a rotating hanger. ... The switch will light to indicate when power is on. ... Note: If the low water indicator lamp becomes illuminated but the water tank is not empty, follow the instructions for decalcification.
www.
conair.com/.../gs95_13pa140688_ib_final.pdf
Conair CorporationMar 1, 2013 - ... water only. 8. Plug the steamer unit into a standard 120V AC power outlet. 9. ... Push button on T-nozzle - light will go on and steam will start.
10/17/2021 12:06:40 AM •
Irons
•
Answered
on Oct 17, 2021
Why isn't my Iron heating up?
I do believe the thermostat is defective.All the iron have a small thermastat top control the temperature and is working like a switch.If the switch don`t work get stuck on the same position.Unfortunatly sometimes is better get a new one themn fix an old one but this is The Market and nothing i can do personally.Also make sure the thermostat knob is working properly.If you hear a click when you turn is ok.
Good Luck
7/23/2021 8:17:42 AM •
Irons
•
Answered
on Jul 23, 2021
Tefal protect concept steam button not working
hi! Long time listner, first time caller.
Iron not steaming AT ALL.
I have a tefal gv 7096
It turned on, all lights working and i can hear it heating up and when opening the calcium deposit i can see steam.
When i pressed the button - nothing. The iron it's self is hot (the plate) the lights on and but no steam.
The cord connecting the iron to the steam was also cold, so i could tell no steam was getting to the iron at all.
I wasn't sure if it was the button not working or something clogging the cord to the iron.
I did the vinegar thing. Let it sit for sometime (40 mins) and still nothing.
I did a weird thing of very carefully putting water on the plate while hot and it created steam from the plate. i think some backflowed and it started steaming, within seconds. might have happened with a bit more time anyway, but it def helped. All wokring fine now :)
7/3/2021 9:03:24 AM •
Irons
•
Answered
on Jul 03, 2021
My iron doesnt have a on/off switch, so how do you unplug it without getting sparks?
you won't unless you install a switch in line of the power cord. in other words put a switch on the cord. You can get them just about any where ACE walmart Home depot.The reason it's doing that is because the heating element is being told to heat up right away. it's not going to hurt anything. it is a good idea to have a switch though
8/23/2020 8:07:29 PM •
Irons
•
Answered
on Aug 23, 2020
Polti steam generator iron
The Polti iron is packed with Italian style and its makes ironing a pleasure not a chore. Its a laundry lovers friend and you will save so much time as you breeze through your weekly mountain of ironing with ease. ... One of my most loved features with the Polti is the lock feature at the front of the iron
5/18/2020 6:29:30 PM •
Irons
•
Answered
on May 18, 2020
How to dismantle Russel Hobbs RHI225 steam iron
Press the self clean button , hold it there, and gently move the iron to and fro, over the basin or bowel. CAUTION: Keep clear of the escaping water and steam. Water and steam will wash scale and dust through the soleplate, and into the basin or bowl. When the water tank is empty, release the self clean button .
https://au.russellhobbs.com/pdf/19840au_-_colour_control_iron.pdf
3/25/2020 2:28:34 PM •
Irons
•
Answered
on Mar 25, 2020
Not finding what you are looking for?