Top 20
Broderbund Printmaster Silver 12.0 - Page 5 Questions & Answers
I recently purchased Broderbund ClipArt 950,000 v.2
Hi,
I have gone to the Broderbund website and found nothing for user guides or user manuals. I did find a way to contact them so I am including that link at the bottom of this post. I am sorry I couldn't find the actual manual for you. Best wishes...hope this helps.
http://www.broderbund.com/store/broder/Content/pbPage.CSQuestion
10/13/2009 4:36:37 PM •
Broderbund...
•
265 views • 0 helpful votes
I get an error 1305
Problem
Error 1305 or 1304
Solution
The Print Shop® 23
Error 1305...
When attempting to install The Print Shop® 23, an error that includes the message "Error 1305..." or "Error 1304..." appears. A conflict during the installation may cause this issue. Completing a clean installation of the program will help to prevent conflicts that can occur. The remainder of this note describes the procedure.
Complete the steps below to reduce conflicts during the installation.
Clean the CD or DVD
- Place a small amount of nonabrasive, liquid soap on the shiny side of the CD or DVD.
- Using your fingertips and warm water, gently rub the soap on the disc in a circular motion.
- Rinse the disc thoroughly and dry it using a clean, soft T-shirt or lint-free towel. Do not use paper towels or tissue paper.
- Install the program.
NOTE: If the error message reappears, I don't know an another massage.
I hope it works for you
8/25/2009 4:23:57 PM •
Broderbund...
•
530 views • 0 helpful votes
I am trying to run
A lot of software is incompatible with Win 7. One should nnever rush out and buy a new op system because Microsoft releases it. The same things happened with XP and Vista. no drivers for much of the common hardware, and software versions that had been working fine on the previous op system. Broderbund is always slow to release new versions, so no there is no fix for this yet.
In some companies they employ Beta Testers, at Microsoft they use sales and clients to route out their bugs, They even have the cheek to charge you to test their monopolized ratty product!
12/8/2009 9:55:38 PM •
Broderbund...
•
32 views • 1 helpful votes
My Print Shop V. 21 will no longer open on my
Run a registry cleaner. After putting things onto a computer and then removing them, things get electronically stirred up. A registry cleaner will steer the program parts to each other and get rid on the junk that has been left on the computer when you deleted anything.
8/9/2009 6:03:26 PM •
Broderbund...
•
342 views • 1 helpful votes
When i try to publish to the web i get an error
Hi there,
If you encounter an error such as "An error occurred while processing this directive" when loading your site, we suggest that you try renaming the WordPress re-direct file called "index.shtml" file to "redirect.wp" located under the "www" directory. You may use a FTP program or Netfirms File Manager to rename the file.
To rename the index.shtml file using Netfirms File Manager, please follow these instructions:
1. Login to the Netfirms Members Control Panel at https://controlpanel.netfirms.com
2. Click Hosting
3. Click Files
4. Click File Manager
5. Click www
6. Check off the file "index.shtml" you wish to rename (a check box appears to the left of each filename)
7. Click Move icon
8. Enter a new filename (we suggest redirect.wp)
9. Click Move
Good Luck!!
Thanks
8/18/2009 10:48:09 PM •
Broderbund...
•
64 views • 0 helpful votes
Installation of new software Print Shop
GO AND SEARCH FOR THE SOFTWARE FROM THE NET. MOSTLY TRIAL VERSION WILL APPEAR BUT THERE WILL BE THE REGESTRICTION KEY WITH U ALONG THE DVD. SO, U TYPE THE KEY IN THE TRIAL VERSION AND U WILL GET THE REAL...
12/8/2008 10:26:58 PM •
Broderbund...
•
258 views • 1 helpful votes
My Employer Says They Are Going To Cut My Wages. Can They?
If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired an
employment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut.
They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.
How to resolve your meter when it's on temper mode
Tamper mode means the prepaid meter is in a mode where it does not supply power. Check your meter remote controller (used for recharging units). If it displays a Relay Open symbol, the meter is in tamper mode.
To remove tamper mode requires you contact the distributing company and request a tamper reset token. The tamper reset token is a 20-digit code that clears the meter from tamper mode and restores it to its default state.
How i can get Erasmus Mundus Scholarship?
To be eligible for the programme you must have the following: A first degree equivalent to 180 credits or 180 ECTS from an internationally recognized university or college. A minimum of two year's practitioner experience in the field of human rights
My dvd screen comes on, but my buttons won't work?
The "Digital labs dl730-pd" model you're referring to appears to be a digital product, but without additional context or specific information, it's challenging to provide detailed information about it. However, here are some general points you might find helpful:
- Product Type: The "dl730-pd" model suggests that it could be a digital device, such as a camera, tablet, or some other electronic gadget.
- Manufacturer: The term "Digital labs" might be the manufacturer's name or brand associated with the product.
- Features: Depending on the type of product, it may have various features and functionalities. For example, if it's a camera, it might have different shooting modes, resolutions, or connectivity options. If it's a tablet, it could have a specific operating system, screen size, and built-in applications.
- User Manual and Support: If you have the product, its user manual should provide detailed information about its features, specifications, and how to use it. Additionally, you may find support resources, such as a website or customer service contact, from the manufacturer for assistance or inquiries.
- Online Research: If you're looking for specific information about the Digital labs dl730-pd model, you might try searching online using the model name or number to find product descriptions, reviews, or specifications.
Not finding what you are looking for?