Nostalgia Electrics PIE-400 4-Pie Electric Pie Bakery - Page 2 - Answered Questions & Fixed issues
I need instructions for Chocolate Fondue
Most of this machines have a bowl at the bottom, and 2 or 3 plates above it with a tube in the middle, if it does look like this first melt some choocolate and put it in the bowl at the bottom. dont start the machine yet!! fill the bowl to about 1 cm under the top of it, then turn the machine on, after a few (1 - 10) seconds the chocolate comes out on the top of the upper plate and pours down over the plates below it, back into the bowl underneath it.
7/21/2009 12:32:44 PM •
Nostalgia...
•
Answered
on Jul 21, 2009
•
310 views
Maplin N20FR - damp test meter. I have no
N20FR - Used to measure the moisture level in sawn timber (also cardboard, paper) 6 to 44% on the left hand scale and hardened materials (plaster, concrete and mortar) 0.2 to 2.0% on the right hand scale
4/14/2024 9:12:34 PM •
Kitchen...
•
Answered
on Apr 14, 2024
•
2,199 views
Gett motor out of toledo meat slicer
Removing the motor from a Toledo meat slicer involves several steps. First, unplug the slicer to ensure safety. Locate the motor, typically positioned near the base. Depending on the model, you may need to remove a cover or access panel to reveal the motor. Disconnect any electrical connections, such as wires or cables, linked to the motor. Next, loosen and remove any securing bolts or screws holding the motor in place. Carefully lift the motor out of its housing, ensuring that no other components are obstructing its removal. Exercise caution and refer to the specific user manual for your Toledo meat slicer model for precise instructions.
2/3/2024 5:14:04 AM •
Kitchen...
•
Answered
on Feb 03, 2024
•
74 views
Manual and parts for Climax 51 hand meat grinder
What can I say about it ... nothing much in it but spares can be aquired on eBay or other sites; https://www.worthpoint.com/worthopedia/climax-51-food-meat-chopper-grinder-3787159752
Not much to go wrong.
1/14/2024 8:33:52 AM •
Kitchen...
•
Answered
on Jan 14, 2024
•
28 views
Not finding what you are looking for?