20 Most Recent Sony Media SoftWare Cinescore SC1000-SONY - Page 4 Questions & Answers

hi there might be...first go to my computer, then locate the dvd drive, right click that and then properties, then click the hardware tab at top then in the list locate dvd drive then at bottom right click on properties then click dvd region and then you should be able to change it....hope that helped

You'll need a decoder from a program like cyber dvd or win dvd. Nero also has one and sonic too. If the drive came with a dvd player program install it. You can also find them through windows media player at microsoft's website but they will cost a few bucks. Search the internet for dvd player software you may find one for free. I hope this helps you. If you are like me you might have a program in your pile of software cds'.

In Windows, open My Computer/Computer and explore/open the disk from it's drive.

why ask 2 times>?

Do you have sound in other applications? You could try using VLC Media Player, instructions here: https://www.thewindowsclub.com/play-blu-ray-on-windows-10

Hello there... Sony seems a choosy brand so it looks like your disc is not recognized by it. Check also your disc for scratches or you just need to clean your disc first before you can use it. Try it. If this doesn't help, try inserting your disc to other CD-ROM. See if your disc is okay. Hope this helps...
Ai-ai :)

The push-button activates a small motor that turns a small rubber belt/ band that opens the cassette door. Since it's not been used for 10 yrs, I would say these belts would have deteriorated and broken. you will need to replace them. the best bet is to open it up and check. if its the case, you should be able to source the belts on ebay.

this is easy, that OUT OF range means the PC sending video is sending and illegall higher resolution than the projector supports (or even less, on this old junk) the manual on that old projector is clear on that. max.SONY VPL-EX4 2007, 13 years old now. and back then projectors STINK ! your manual shows this, and stinks.what stinks worse is no matrix of legal H./V resolutions shown in the manual. (shows only 1)so set the PC to 1400 x 1050 and do not use others . ok.and 60Hz, are you in USA? not stated country.

no OS stated, W10? the drivers for your camera/mic are wrong, reload them from SONY..com

Hi, Looks like you are having a bad LCD screen, This could be due to drop damage. Cracks can be so tiny and may not be visible immediately. I would take it to a technician and get a screen replacement.

Check the cooling fan in the rear

You probably need more ram memory. Also try playing a video in your dvd player. If it plays slow and choppy you definitely need more ram memory.If you are trying to play a video from a website (streaming) then three things can affect how smooth it plays.1) Memory - your ram memory might be low2) The website might be experience heavy traffic from many users.3) The Line Speed of your internet connection from your service provider might be slow. For example: AT&T sells about 3 or 4 different packages and each one increases the line speed for uploading or downloading. If you buy the low end package the line speed is very slow on uploading and downloading or streaming. It's ok for just surfing, but nothing else.

1st leave the battery out, then power only with AC power pack push power for 10seconds and releases. the batteries are bad, as more are, in the wild. most.

all things can be repair, only price to do so matters. one mans garbage is others treasure. can't speak for you ever. but in my hands yes, garbage. spend hard cash on newer more supported products. 2010 or newer is good rule.

Might be motor-boating. Used to be a fairly common fault with older less sophisticated circuitry. The cause could be anything from a fault in an interim power supply to stray feedback causing an oscillation with a low speed harmonic. Considering your description it could be the latter - impedance mismatch maybe, between the external mic and the amp input...

Sounds like you accidentally pressed the power button while you were dusting and turned it off. You just need to turn the HT-S200F back on. It's the 1st button on the left of the control panel, which is located on top of the soundbar, in it's center. . https://www.sony.com/electronics/support/res/manuals/4727/47274141M.pdf

Have a look at VLC media player at http://www.videolan.org/vlc/ It's free and plays pretty much any video format, including DVDs

If you live in the rural area and you have a broadband connection/modem connected to the Netgear wireless router, then I suggest you look at my instruction on how to configure the wireless router with encryption (security) - click on this link for instructions. :-
http://www.fixya.com/support/r3559128-wireless_router_security

English?

wow now the PN emerges, sure. so now we land on 2009 laptops ok. are you using XP or VISTA, if yes there is no support for that now, its a dead product. this device. now last model made Windows 7. here is the option card that makes BT work per your spec. quote: Connectivity: Wi-Fi 802.11 b/g/n, Integrated Stereo A2DP Bluetooth technology, wireless broadband (technology used varies by region, including WiMax, HSDPA and 3G), GPS (model-dependent) "means options !!!!!!" day 1 new......!!!! if you do not have that card, there is no BT. you then add one. the card varies by COUNTRY , no country stated, at all. no OS stated at all no answers possible. the maker sure does not support it but gee ask them first.?