20 Most Recent Kenmore 40" Self-Clean Freestanding Electric Range with Two Questions & Answers

turn it off and disconnect all the electric. DO NOT mess with the gas. call a technician. Safety first.

Check that you have not set a timer, e.g., "start the oven at 4 PM".

You can buy a 40 watt appliance bulb at almost any store that sells bulbs.

sounds like knob needs replacing (broken).

so does mine

Check out stovedecals.com - they offer Kenmore stove decals for your stove or cooktop.

Clear the lock mechanism -- as indicated by the DOOR LOC light -- by pressing and holding in the oven door light switch for 20 to 30 seconds. While the switch is depressed, the latch motor will gradually withdraw the lock, allowing you to open your oven door.

Shut your gas off at the tank or meter valve. Open windows and doors and vacate. Call an appliance or gas technician!

Suggest down load the owners manual online and reference error codes.

no body at fixya site will do anything you have to contact the service agent direct yourself to book a service

Voltage check at plug or power panel

Fuse or control

Do you mean safety light to let you know burner is hot?????

Usually you can copy wiring from other element. Safest to consult wiring diagram found inside control panel.

Check fuses. Burners are usually fused in pairs. Probably 2 fuses since 220V.(one for each 110 side of feed).

Press and hold oven light switch on panel