20 Most Recent Graco Lauren Crib - Page 4 Questions & Answers

0helpful
1answer

Crib

The instructions are in the envelope zip-tied to the mattress springs. It's a really stupid place for it, because you think you don't need to open that box until the end.
I had to call LaJobi (the manufacturer) and ask. They get at least one call a day. Here's their number if you really didn't get instructions.

LaJobi 877-440-2224
3/30/2009 8:53:45 PM • Graco Lauren... • Answered on Mar 30, 2009
0helpful
1answer

Lowering the Mattress

Call LaJobi (the manufacturer) and ask.

LaJobi 877-440-2224
3/30/2009 8:53:21 PM • Graco Lauren... • Answered on Mar 30, 2009
0helpful
1answer

I need instructions on how

The instructions are in the envelope zip-tied to the mattress springs. It's a really stupid place for it, because you think you don't need to open that box until the end.
I had to call LaJobi (the manufacturer) and ask. They get at least one call a day. Here's their number if you really didn't get instructions.

LaJobi 877-440-2224
3/30/2009 8:51:25 PM • Graco Lauren... • Answered on Mar 30, 2009
0helpful
1answer

How to assemble the crib

The instructions are attached to the mattress springs. I had to call LaJobi (the manufacturer) and ask. They get at least one call a day. Here's their number if you really didn't get instructions.

LaJobi 877-440-2224
3/30/2009 8:49:53 PM • Graco Lauren... • Answered on Mar 30, 2009
0helpful
2answers

Where do I find replacement

Please read this, there was a recall...

About 1 Million Simplicity Cribs Recalled Due To Failures Resulting in Infant Deaths NOTE: Repair Kits that immobilize the drop-side are now available
ALSO NOTE: Consumers who have participated or have yet to respond to Simplicity’s June 2007 recall of Nursery-in-a-Box cribs are strongly urged to also participate in this recall. AND ADDITIONALLY: A subsequent recall involving Simplicity drop side cribs has been issued. WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission (CPSC) is announcing today a voluntary recall with Simplicity Inc., of Reading, Pa., of about 1 million cribs. The drop-side can detach from the crib, which can create a dangerous gap and lead to the entrapment and suffocation of infants. CPSC is aware of two deaths in Simplicity manufactured cribs with older style hardware, including a 9-month-old child and a 6-month-old child, where the drop-side was installed upside down. CPSC is also aware of seven infant entrapments and 55 incidents in these cribs. CPSC is also investigating the death of a 1-year-old child in a Simplicity crib with newer style hardware, in which the drop-side was installed upside down. CPSC is warning parents and caregivers to check all Simplicity cribs to make sure the drop-side is installed right side up. The drop-side failures result from both the hardware and crib design, which allow consumers to unintentionally install the drop-side upside down. This, in turn, can weaken the hardware and cause the drop-side to detach from the crib. When the drop-side detaches, it creates a gap in which infants can become entrapped. CPSC is also aware of two incidents that occurred when the drop-side was correctly installed with older style hardware, though the upside down installation greatly increases the risk of failure. The recalled Simplicity crib models include: Aspen 3 in 1, Aspen 4 in 1, Nursery-in-a-Box, Crib N Changer Combo, Chelsea and Pooh 4 in 1. The recall also involves the following Simplicity cribs that used the Graco logo: Aspen 3 in 1, Ultra 3 in 1, Ultra 4 in1, Ultra 5 in 1, Whitney and the Trio. The recalled cribs have one of the following model numbers, which can be found on the envelope attached to the mattress support and on the label attached to the headboard: 4600, 4605, 4705, 5000, 8000, 8324, 8800, 8740, 8910, 8994, 8050, 8750, 8760, and 8996. The cribs, which were made in China, were sold in department stores, children’s stores and mass merchandisers nationwide from January 1998 through May 2007 for between $100 and $300. As an immediate precaution, consumers should check to see if the drop-side is installed right side up. To do this, check to see that the slightly rounded rail with the decorative groove is installed at the top and the plain rail is on the bottom. Next, consumers should make sure the drop-side is securely attached to the tracks in all four corners.

Here's the site where I found this...

http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

Good luck, be safe.
2/2/2009 1:08:59 AM • Graco Lauren... • Answered on Feb 02, 2009
0helpful
1answer

I am in desperate need

La Jobi makes that crib for GRACO. Maybe they can provide them if GRACO can't. www.lajobi.com

2/1/2009 1:39:46 PM • Graco Lauren... • Answered on Feb 01, 2009
0helpful
1answer

LaJobi Graco Charleston Crib all hardware

examine what you need and go to a hardware store for nuts and bolts
8/30/2023 1:57:15 PM • Graco Baby Gear • Answered on Aug 30, 2023
0helpful
1answer

Does Graco stroller model 7B06GLR3 recline?

Some do, some don't. Needs to be a 'Modes' stroller. Is this it? https://download.gracobaby.com/ProductInstructionManuals/ISPA083AD.pdf ..
6/12/2023 4:44:27 PM • Graco Baby Gear • Answered on Jun 12, 2023
0helpful
1answer

I have the Graco Glider XL that I bought from a yardsale for $15. The only thing I can get to work is the vibration part. The swing its self will not turn on, swing or music. I've tookin it apart... I do not believe it is the motor because the music should still be working... What else could it be? And also how do I tell if the motor is bad? How can I test it?

I have the exact same swing with the exact same problem, sometimes it will come on and sometimes it does absolutely nothing. It has made me very angry because i took it apart and cleaned the internals up, when i put it back together, it worked fine until my baby wanted to swing the next day, and then it refused to work again. Now the pile of junk is sitting at the edge of my yard after i slung it out the door. My advice, Throw it in the trash where it belongs and go buy a different brand because Graco is TRASH.
10/1/2022 2:37:16 PM • Graco Baby Gear • Answered on Oct 01, 2022
0helpful
1answer

Graco Ashland classic crib instruction Manuel

the lengths of screws are shown.. buy new screws and barrel nut to ensure they will work. If you have hex key take it o hardware store and choose screws that fit wrench. https://www.gracobaby.com/replacementparts https://www.manualslib.com/manual/557914/Graco-3281642-043-Ashleigh-Classic-Crib.html
2/15/2022 6:29:02 PM • Graco Baby Gear • Answered on Feb 15, 2022
0helpful
1answer

Where is the motor located on a graco Duoglider swing model 2000709?

Probably better to ask them direct especially if it needs warranty repair. We are not they, we are Fixya. We just have a Graco category for handy filing of questions. https://www.gracobaby.com/home-and-gear/swings-and-jumpers/swings/ ..
9/16/2021 8:43:34 PM • Graco Baby Gear • Answered on Sep 16, 2021
0helpful
1answer

Crib hardware replacement for Graco Freeport Convertible Crib

Crib hardware presents a safety issue. Best to go with what Graco supplies/recommends.
11/20/2020 2:35:42 AM • Graco Baby Gear • Answered on Nov 20, 2020
0helpful
2answers

Can the Graco Symbio brake be repaired?

same problem, can't open the black cylinder, affraid to crack it. did you find the solution ?
6/2/2020 7:14:25 PM • Graco Baby Gear • Answered on Jun 02, 2020
0helpful
1answer

How do you remove canopy from graco sweetpeace

You need to remove the center of the part that connects to the chair. Use a thin screwdriver into the center and then pry each of the two tabs outward from the center. As you unhook it, you will be able to pry it out and then the attachment mechanism will pull off
5/31/2020 5:50:06 PM • Graco Baby Gear • Answered on May 31, 2020
0helpful
1answer

How to remove seat wire, after putting it in wrong on the Graco uno2duo stroller?

This question was posted a long time ago, but no one answered it correctly. If you put the wire in backward, look on the end of where the wire was inserted. You made have to move the fabric to see it. There are holes. Use something to push in the metal piece that is showing as you pull out each side of the wire. I used a house key to push in the button while I removed the wire.
4/3/2020 10:00:47 PM • Graco Baby Gear • Answered on Apr 03, 2020
0helpful
1answer

Graco Colby pack 'n play instructions for canopy

http://s7d2.scene7.com/is/content/Newellsync/279735 Call toll free 800 number for assistance shown in online manual. (I am not posting the phone number here because of spammers posting fraudulent phone numbers on FIXYA, but manual appears legitimate.)
11/4/2019 6:49:28 AM • Graco Baby Gear • Answered on Nov 04, 2019
Not finding what you are looking for?
Graco Lauren Crib Logo

86 questions posted

Ask a Question

Usually answered in minutes!

Top Graco Baby Gear Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a Graco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Graco Baby Gear

  • Graco Baby Gear

Most Popular Question

need replacment hardware graco lauren

  • Baby Gear
Loading...