Kirby G10 Sentria Vacuum Cleaner Refurbished - Answered Questions & Fixed issues

The wheels are held on by a screw behind the wheel guard, i suspect your height adjuster has come loose off the spline, this can be simply tapped back onto the axle

Make sure the emptor at the. Bottom of the bag assembly is turned all the way clockwise. It pushes in on lever on the switch. It won't run if the lever is not pushed all the way.

The transmission is shifted when the handle is pushed or pulled. This may come out of adjustment or be worn. It is also important to have a good belt on the brush roll as this aids in moving forward. The third problem may be worn wheels which also are necessary to make it drive properly. You need hands on to fix this. Take it to an expert in your area.

Sounds like you might be hitting the reverse button some vacuums have. Otherwise there's stuff getting trapped in the space above the beater bars and when you lift the vacuum while it's running, this trapped trash has an opportunity to get out now that there's no pressure from the floor. You might want to check and make sure there's nothing stuck in your tubing that's preventing things from going into the bag. My wife use to suck up gum wrappers and half sheets of paper and it would clog up the hose. I'd have to use a broom stick of wire coat hanger to unplug this.

click this link for instructionshttp://www.vacuumland.org/cgi-bin/TD/TD-VIEWTHREAD.cgi?7841

I thought they all switch off when the handle is at rest in the upright position, for safety.

If you're experiencing difficulty in removing the spindle on a Kirby G4 vacuum cleaner because the fan is spinning on the shaft, there are a few steps you can try to address this issue: 1. Unplug the vacuum cleaner: Ensure that the vacuum cleaner is unplugged from the power source to avoid any accidental injuries. 2. Secure the fan: Take a closer look at the fan assembly and identify if there are any parts that can be held or secured to prevent it from spinning. You may need to use tools like pliers or a wrench to hold the fan in place while you work on removing the spindle. Be cautious not to damage the fan or other components. 3. Determine the direction: Confirm the direction in which the spindle is threaded. Most Kirby vacuums have reverse-threaded spindles, which means you will need to turn it counterclockwise to loosen it. 4. Apply force to the spindle: Once the fan is secured, try applying counterforce to the spindle by turning it counterclockwise. You may need to use a wrench or pliers for better grip and leverage. Apply steady and controlled force, but avoid using excessive force that could potentially damage the components. 5. Penetrating oil: If the spindle is stubborn and difficult to loosen, you can try applying a small amount of penetrating oil, such as WD-40 or similar lubricants, to the junction between the spindle and the shaft. Allow it to sit for a few minutes to help loosen any potential corrosion or debris that might be causing the resistance. 6. Repeat the process: If the spindle still doesn't budge, repeat the steps above, ensuring that the fan is securely held in place and you're applying the correct force and direction to the spindle. If you continue to experience difficulty or are unsure about proceeding, it might be best to consult a professional or reach out to the Kirby customer support for further assistance. They can provide more specific guidance tailored to your vacuum model.

heres a video

try here.... https://www.ebay.com/itm/181726310306 Best to you

From my memory of a Kirby I had in the early 80s the belt has a twist in it. It has do go on the right way. One way pulls it on, and the other throws it off due to the rotation of the motor shaft. https://www.google.com/search?q=kirby+3cb+replace+belt ..

Question edited from 'Senteria' to 'Sentria', and added full 'make model (what it is)'. Question moved from Computers and Internet to Kirby Vacuum. Details on disassembly in the link. https://www.google.com/search?q=Kirby+Sentria%2C+handle+tilt+latch+jammed ..

sounds like a motor bearing might be bad

Contact Kirby direct

Sentria - The Kirby Company - Kirby Vacuum

https://www.kirby.com > earlier-kirby-models > sentria

The Sentria Model includes softer lines and gentler curves on its design, giving it a sleek and soft look. The handle was redesigned on this model to provide ...

try running motor without belt if still gets hot motor overheating if doesnt get hot make sure belt not slipping

The switch has become defective and will have to be replaced.

https://www.youtube.com/watch?v=kl-eufeXBAI

There should be a definite audible click when you press down on the switch. Most switches also latch so that there is a little play in the foot switch when it is on. Possible problems included - blown fuse in the plug, damaged cord, failed starter capacitor. It may be an idea to take it to a local vacuum repair store and get an estimate for repair.