20 Most Recent Dewalt DW735 13-Inch Two Speed Thickness Planer Questions & Answers

Check the switch with a continuity tester.

Wood chips are probably jamming the height adjustment, and need to be cleaned out. Lubricate the machine once it's clean.

Yep, they are all words. I put them in the right order! :>D No wiring diagram available and no service manual. https://www.google.com/search?q=dewalt+dc500+wiring+diagram It should be 110 volts in, and through a transformer to 18 volts output where is meets up with the 18 volt battery socket and from there to the motor. ..

Yes, it is an indication that the brushes are too short and not making a firm contact.

Mine stopped working and I fixed it quick, I found a video on youtube showing how to bypass to computer and/or how to see if that's the issue . https://youtu.be/pMFOacGVr8Q

yes

Whats your question?

there are replaceable parts in motor, it must be replaced. DeWALT DC728 Parts List and Diagram Type 1 eReplacementParts com

may be the carbon brushes are short or motor connectors have become bad connection by moisture and dirt by use temporay a wrong filter sometimes its a very light and simple motor johnson motor with hammer brushes DeWALT DC500 Type 1 Vacuum Parts

Check the switch.

Check the hose to see if it's clogged.

order it online Im sure that the parts should be available through briggs and stratton or yardman inc

The model number that you posted does not apply to the motor. The motor series that you posted is for a vertical motor that does not match the model. Can you supply more information?

It's more likely to be either the cable or an external fuse/breaker or the switch. Get someone to check continuity through the plug, cable and switch. There may not even be a fuse inside it.

look at the manual from manufacturer

Dewalt Service Center faxed me one!

That would depend on the make and model of the steamer.