Top 20
Riccar Model RC1100 Canister Vacuum Cleaner Bags - Page 5 Questions & Answers
Dont owners manual
Get a new belt. If that doesn't take care of it, replace the rubber motor mount and metal pivot. Your vacuum is probably close to 20 years old and has some worn parts.
N2000 clean filter
The red guard goes on top of the foam after it is installed. The purpose of the red guard is to keep the bag from sucking down against the filter when you get a few inches of dirt in the bottom of the bag. If it sucks down against the filter the dirt in the bag will cause an airlfow restriction even though the bag is not full.
Coin in motor riccar vacuum
It's impossible to get a coin the motor of most Riccar models. Take it to your dealer to see if it's possible with your model.
Broken belt
Remove the bottom plate to gain access to the belt.
How can I replace the belt on a Riccar Rad 8 model
Your belt should not need replaced unless it has over heated the belt somehow. It has a lifetime belt. There are screws on the bottom of the vacuum that allow the cover of the nozzle assembly to be removed to gain access to the belt area. It may be less cost in the long run to have it looked at by a Riccar repair technician.
Not finding what you are looking for?