Robot Coupe CL52D Food Processor - Answered Questions & Fixed issues
Robo coupe CL52D would not turn on
There is a reed swich (safety switch) located on the top where the lid comes down. A reed switch works with a magnet. If the magnet is missing or the reed swictch is bad, no power will be allowed to the motor. Send me your e-mail & I will look up the part # in my Robot-Coupe manual.
[email protected]
7/25/2009 4:35:17 AM •
Robot Coupe...
•
Answered
on Jul 25, 2009
•
756 views
I purchased a Robot Coupe R101 and wanted to add the Pulse button. Do I just get a R101 Plus switch and front panel? How hard is the replacement?
Thanks
To add the pulse button to your Robot Coupe R101, you will need to purchase the R101 Plus switch and front panel. The replacement is relatively simple and can be done by following these steps:
- Turn off and unplug the Robot Coupe R101.
- Remove the screws that hold the top cover in place and lift off the cover.
- Locate the control panel on the front of the machine and remove the screws that hold it in place.
- Carefully remove the control panel and disconnect the wires from the old switch.
- Install the new R101 Plus switch onto the control panel and connect the wires.
- Replace the control panel onto the front of the machine and secure it in place with the screws.
- Replace the top cover and secure it in place with the screws.
Once the new switch and front panel are installed, you will have the pulse button on your Robot Coupe R101.
Robot coupe 3b wiring diagram
Wiring diagrams are in the back of the manuals after the parts lists.https://www.partstown.com/robot-coupe/blixer-3b/parts#id=mdptabmanuals..
How to Order Food on Train?
To order food on a train, you can use various online platforms like IRCTC e-catering, RailRestro, or local vendors available at specific stations. Simply provide your train details and select your preferred meal options through their websites or apps.
1/6/2024 9:41:14 AM •
Food Processors
•
Answered
on Jan 06, 2024
•
26 views
Masterchef 65 I can't get the liquidiser to lock into place
If you are having trouble getting the liquidiser to lock into place on your Masterchef 65, here are a few things you can try:
- Make sure the blender jar and the base are lined up correctly. The grooves on the base and jar should match up perfectly.
- Check to see if the locking mechanism is clean and free of debris. Use a soft cloth to clean the locking mechanism and the area around it.
- Try pressing down on the jar while turning it clockwise to see if it will lock into place.
- If none of the above works, it may be possible that the locking mechanism is damaged or worn. In this case, you may need to contact the manufacturer or a professional repair technician for further assistance.
I hope this helps
2/28/2023 9:16:32 AM •
Food Processors
•
Answered
on Feb 28, 2023
•
54 views
What is a primary consumer
In a food web, a primary consumer is an organism that feeds on producers (plants) to obtain energy and nutrients. Primary consumers are also known as herbivores or plant-eaters. They occupy the second trophic level in a food chain, with producers at the first trophic level. Examples of primary consumers include rabbits, deer, cows, and many insects that feed on plants.
2/24/2023 6:25:17 PM •
Food Processors
•
Answered
on Feb 24, 2023
•
243 views
Not finding what you are looking for?