Top 20 Robot Coupe CL52D Food Processor Questions & Answers

There is a reed swich (safety switch) located on the top where the lid comes down. A reed switch works with a magnet. If the magnet is missing or the reed swictch is bad, no power will be allowed to the motor. Send me your e-mail & I will look up the part # in my Robot-Coupe manual. [email protected]

Left hand thread perhaps.

Wiring diagrams are in the back of the manuals after the parts lists.https://www.partstown.com/robot-coupe/blixer-3b/parts#id=mdptabmanuals..

you look for hidden screw perhaps under a label

To add the pulse button to your Robot Coupe R101, you will need to purchase the R101 Plus switch and front panel. The replacement is relatively simple and can be done by following these steps:

1. Turn off and unplug the Robot Coupe R101.
2. Remove the screws that hold the top cover in place and lift off the cover.
3. Locate the control panel on the front of the machine and remove the screws that hold it in place.
4. Carefully remove the control panel and disconnect the wires from the old switch.
5. Install the new R101 Plus switch onto the control panel and connect the wires.
6. Replace the control panel onto the front of the machine and secure it in place with the screws.
7. Replace the top cover and secure it in place with the screws.

Once the new switch and front panel are installed, you will have the pulse button on your Robot Coupe R101.

Pour penetrating oil down the upper shaft if possible. Remove the allen scews from the base with 5/32 T handle wrench. Remove the round snap ring on the motor shaft. Use vise grips or channel lock to secure the shaft. Twist the blade off and inspect it. It most likely will need to be replaced as the key that slides on the shaft will have deteriorated.

Yes you will need to replace the machine.

You will need to find a "small appliance repair shop" in your area, most likely the main PCB has failed, it controls the motor. Check the yellow pages.

how old is you megamix. you had to be carful and pull it out.

Sounds like the bush is either worn, or the shaft has got rusted.

Hi im after a replacement lid for my robot chef rc3 if anyone has a spair one please email me at [email protected]

Robot-Coupe USA.com should be able to sell you anything needed

To order food on a train, you can use various online platforms like IRCTC e-catering, RailRestro, or local vendors available at specific stations. Simply provide your train details and select your preferred meal options through their websites or apps.

Question translated. We only speak English on this North American website. Question moved from Computers to Food Processors. No spares available for it. https://www.google.com/search?q=Silvercrest+SMZ400A1+parts https://www.manualslib.com/manual/2171818/Silvercrest-Smz400a1.html?page=30#manual ....

Make and Model helps!! Here are some 7 Cup Processors

Owner's Manual

KitchenAid https://www.kitchenaid.com > global > documents Before operating the Food Processor, be sure the work bowl, blades/disc and work bowl cover are properly assembled on the base (see the "Assembling the Food. 56 pages

7 CUP FOOD PROCESSORS

KitchenAid https://www.kitchenaid.ca > global > documents Insert the desired blade or disc into the work bowl. See next page for instructions. 5. Place the work bowl cover on the work bowl with the feed tube just.

Food Processor Manuals

Cuisinart https://www.cuisinart.com > manuals > food_processors Find manuals for our current and discontinued food processor products. Maximize the performance of your food processor and learn about the safety features.

5KFP0719AOB-User-Manual.pdf

Winning Appliances https://www.winnings.com.au > public > manuals > 5KFP... No information is available for this page. Learn why 11 pages

If you are having trouble getting the liquidiser to lock into place on your Masterchef 65, here are a few things you can try:

1. Make sure the blender jar and the base are lined up correctly. The grooves on the base and jar should match up perfectly.
2. Check to see if the locking mechanism is clean and free of debris. Use a soft cloth to clean the locking mechanism and the area around it.
3. Try pressing down on the jar while turning it clockwise to see if it will lock into place.
4. If none of the above works, it may be possible that the locking mechanism is damaged or worn. In this case, you may need to contact the manufacturer or a professional repair technician for further assistance.

I hope this helps

The blades lift off. As long as the lid is off the bowl should rotate unless the safety interlock pin hasn't retracted. Press it down, let go and jiggle the bowl.

Question edited for clarity. Please don't type in all CAPS, it is considered SHOUTING and harder to read. Question moved from Cats (animal) to Food Processor category. The search query for this is simply make model parts You don't give the maker and just random numbers which are getting confused by other items with those same numbers. https://www.google.com/search?q=food+processor+blade https://www.google.com/search?q=Q2831 https://www.google.com/search?q=35%2F03 ..